Lexmark X852E Setup Guide - Page 31

Step 6: Attach cables and power cords Attaching cables to the printer Note: Germany: Use only the German TAE type F adapter shipped with this product because it contains a billing tone filter. The adapter is designed only for the F connector of the German wall outlet. This must be the only device attached to the NFN wall receptacle. Switzerland: Use only the Swiss adapter shipped with this product because it contains a billing tone filter. Connect the printer to the telephone line, network, and MFP. 1 Connect the RJ-11 telephone fax line cable into the fax modem port on the back of the print server installed in your printer. 2 If you received a telephone adapter specifically designed for use in your country, attach the telephone adapter to the telephone fax line cable and plug the fax line cable into the phone line outlet. 3 Connect the Ethernet cable into the Ethernet network port on the back of the print server installed in your printer. 4 Connect the scanner cable to the printer, but do not turn the power on yet. Telephone fax line cable (RJ-11) Ethernet network cable Scanner cable Attach cables and power cords 26