Lexmark X852E Setup Guide - Page 55

This precaution may be particularly important in rural areas. CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. This equipment uses the following jacks: CA11A. European Community (EC) directives conformity This product is in conformity with the protection requirements of EC Council directives 89/336/EEC, 73/23/EEC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment. A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France. Warning: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This product satisfies the Class A limits of the EMC standard EN 55022 and the safety requirements of EN 60950. It is compliant with the telecommunication standard: TBR 21 for use with Telecommunication Terminal Equipment which is permitted by Council Directive 1999/5/EC of the European Parliament and of the Council relating to Radio & Telecommunications Terminal Equipment. Network compatibility notices This equipment has been designed, tested, and found to be compliant with the essential requirements of European technical standard TBR 21 for Pan-European single terminal connection to the Public Switched Telephone Network (PSTN). This applies to all print servers which bear the following mark: This equipment is designed to inter-work with PSTN's that accept analog signals. However, due to differences between the individual PSTNs provided in different countries, the TBR 21 certification does not, in itself, give an unconditional assurance of successful operation on every PSTN termination point. In the event of problems, contact your equipment supplier in the first instance. There are currently no interoperating difficulties for the following countries: Austria France Greece Portugal Spain Belgium Germany Iceland Sweden Norway Denmark Luxemburg Ireland United Kingdom Finland Netherlands Italy Switzerland Using the print server in Germany The print server requires a German billing tone filter to be installed on any line which receives metering pulses in German. Contact customer support for ordering information. The subscriber may request that metering pulses be placed on the line, or can have them removed by calling the German network provider. Normally, metering pulses are not provided unless specifically requested by the subscriber at the time of installation. Using the print server in Switzerland The print server requires a Switzerland billing tone filter to be installed on all equipment used in Switzerland since metering pulses are present on Notices 50