Lexmark XC9465 Quick Reference - Page 11

Loading the 2000-sheet tandem tray

Get Lexmark XC9465 PDF manuals and user guides View all Lexmark XC9465 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

• Load prepunched paper faceup with the holes against the front of the tray. For two‑sided, short‑edge printing • Load letterhead facedown with the header toward the left side of the tray. For two‑sided, long‑edge printing • Load letterhead facedown with the header toward the back of the tray. • Load prepunched paper facedown with the holes against the right side of the tray. • Load prepunched paper facedown with the holes against the back of the tray. Notes: • Do not slide paper into the tray. • Make sure that the side guides fit snugly against the paper. • Make sure that the stack height is below the maximum paper fill indicator. Overfilling may cause paper jams. 5 Insert the tray. If necessary, set the paper size and type to match the paper loaded in the tray. Note: When a finisher is installed, the images are rotated to 180° when printed. Loading the 2000-sheet tandem tray CAUTION-TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the tray. Note: To avoid jams, do not pull out trays while the printer is busy. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
•
Load prepunched paper faceup with the holes against the
front of the tray.
For two
‑
sided, long
‑
edge printing
•
Load letterhead facedown with the header toward the back
of the tray.
•
Load prepunched paper facedown with the holes against
the right side of the tray.
For two
‑
sided, short
‑
edge printing
•
Load letterhead facedown with the header toward the left
side of the tray.
•
Load prepunched paper facedown with the holes against
the back of the tray.
Notes:
•
Do not slide paper into the tray.
•
Make sure that the side guides fit snugly against the
paper.
•
Make sure that the stack height is below the maximum
paper fill indicator. Overfilling may cause paper jams.
5
Insert the tray.
If necessary, set the paper size and type to match the paper
loaded in the tray.
Note:
When a finisher is installed, the images are rotated to 180°
when printed.
Loading the 2000-sheet tandem tray
CAUTION—TIPPING HAZARD:
To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Pull out the tray.
Note:
To avoid jams, do not pull out trays while the printer is
busy.
11