Lexmark XC9465 Quick Reference - Page 15

Loading the envelope tray

Get Lexmark XC9465 PDF manuals and user guides View all Lexmark XC9465 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Note: Use the indicators on the bottom of the tray to position the guides. 6 Close the tray side door, and then insert the tray. If necessary, set the paper size and type to match the paper loaded in the tray. Note: When a finisher is installed, the images are rotated to 180° when printed. Loading the envelope tray CAUTION-TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the envelope tray. Note: To avoid jams, do not pull out trays while the printer is busy. 2 Flex, fan, and align the envelope edges before loading. 4 Load the envelopes with the flap side down and against the left side of the tray. Notes: • Make sure that the side guides fit snugly against the envelopes. • Make sure that the stack height is below the maximum fill indicator. Overfilling may cause jams. 3 Adjust the guides to match the size of the envelope that you are loading. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
6
Close the tray side door, and then insert the tray.
If necessary, set the paper size and type to match the paper
loaded in the tray.
Note:
When a finisher is installed, the images are rotated to 180°
when printed.
Loading the envelope tray
CAUTION—TIPPING HAZARD:
To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Pull out the envelope tray.
Note:
To avoid jams, do not pull out trays while the printer is
busy.
2
Flex, fan, and align the envelope edges before loading.
3
Adjust the guides to match the size of the envelope that you
are loading.
Note:
Use the indicators on the bottom of the tray to position
the guides.
4
Load the envelopes with the flap side down and against the
left side of the tray.
Notes:
•
Make sure that the side guides fit snugly against the
envelopes.
•
Make sure that the stack height is below the maximum
fill indicator. Overfilling may cause jams.
15