Lexmark XM9145 Quick Reference - Page 19
jam, press latch to access area, G. Leave paper in bin. [40y.xx]
View all Lexmark XM9145 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Notes: • Make sure that all paper fragments are removed. • If the 3000‑sheet tray is installed, then slide the tray to the right to open the door. 7 Close door C. [x]‑page jam, press latch to access area G. Leave paper in bin. [40y.xx] 1 Remove all paper from the staple finisher bin. 2 Press the latch and slide the staple finisher to the left, and then remove the jammed paper. 3 Slide the finisher back into place. Notes: • Make sure that all paper fragments are removed. • If necessary, turn spinner wheel G1 downward to feed jammed paper into the finisher bin, and then remove the paper. 4 Open door C, and then remove the jammed paper. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. Notes: • Make sure that door C does not hit any cable attached to the printer. • Make sure that all paper fragments are removed. • If the 3000‑sheet tray is installed, then slide the tray to the right to open the door. 19