Lexmark XM9145 Quick Reference - Page 6
Loading the multipurpose feeder
View all Lexmark XM9145 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Notes: • Load printable side facedown for duplex printing. • Load pre-punched paper with the holes toward the front or the left side of the tray. • Load letterhead with the header on the left side of the tray. • Make sure that the paper is below the maximum fill line on the edge of the paper tray. Overfilling may cause paper jams. 2 Adjust the guide to match the size of the paper you are loading. 3 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load the paper stack with the printable side faceup. 5 Insert the tray. 6 From the control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Loading the multipurpose feeder 1 Open the multipurpose feeder. 3 Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load the paper. • Load only one size and type of paper. Loading letterhead Without an optional finisher With an optional finisher One‑sided printing One‑sided printing Note: For long-edge orientation, load letterhead facedown with the header on the left side of the feeder. Note: For long-edge orientation, load letterhead facedown with the header on the right side of the feeder. 6