LiftMaster EL2000 EL25-KEYPAD PROGRAMMING Manual - Page 7

Quick Reference Guide Quick Reference Guide Quick Reference Programming Page Number Description of Task 57 34 Delete an Entry Code Factory Setting Programming Procedure 57 # (entry code) # 58 37 Assign Utility Option Off 58 # (entry code) # (Option; 0=Off, 1=Daily, 2=Weekly, 3=Never) # (number of uses 1-15) 59 37 Assign Special Use Entry Code 59 # (entry code) # enable/disable # 60 24 Assign Each External Main keypad 60 # (device 1-4) # (door 1-4) # Access Control assigned door1 Device a "Door Number" Device 1=door 1 Device 2=door 2 Device 3=door 3 Device 4=door 4 61 24 Assign "Each" Door Number to One or More Relays D1=Relay 1 D2=Relay 2 D3=Relay 3 D4=Relay 4 61 # (door 1-4) # (relays to activate 0000-1111) # Order of relay is: relay 4-relay -3 -relay 2-relay 1 for an example if you want relay 4 active you would enter 1000, if you want relay 1 active you would enter 0001 63 51 Assign Door Use Time Zone Enabled 63 # (door 1-4) # (time zone, 0-63) # 64 53 Set Anti-Passback Entry/Exit Disabled 64 # (device 0-4) # for Specific Devices (0-3; 0=disable, 1=set device to timed anti-passback, 2=set device to true anti-passback-entrance, 3=set device for true anti-passback-exit) # 65 23 Set Each "Relay Mode" All Relays= 65 # (relay 1-4) # (1-5; 1=strike, 2=shunt, to get the "1-Strike" 3=CCTV, 4=alarm, 5=control) # Appropriate Response 66 23 Set Each Relay's "Activation Time" All Relays= 10 seconds 66 # (relay 1-4) # time (1-300 seconds) 67 65 Request to Exit Device (REX) R1=Door 1 67 # (REX number 1-4) # (select REX option: R2=Door 2 0=disabled, 1=use your door settings or 2=use R3=Door 3 specific relay(s) 0000-1111) # R4=Door 4 Order of Relays are 4321 68 66 Door Sensing Devices DS1= Door 1 68 # (sensor number 1-4) # (select sensor DS2= Door 2 option: 0=disabled, 1=use your door settings or DS3= Door 3 2=use specific relay(s) 0000-1111) # DS4= Door 4 Order of Relays are 4321 69 64 Postal Lock Switch Door 1 69 # (door 0-4; 0=no postal lock) # 70 64 Autocall Device 0000 70 # (relays to activate 0000-1111) # Order of relays are 4321 (Factory Default: 0000) 71 43 Set the Default Card Type 30 71 # (26 or 30) # (Factory Default: 30) 73 43 Set the Default Facility Code 0 73 # (0-255) # 74 43 Enable or Disable Ignore Enabled 74 # (0=disable; 1=ignore) # Facility Code when a Card is Used 75 36 Change Entry Code Door Access All Doors 75 # (entry code) # (door 0=any door, 1=door 1, 2=door 2, 3=door 3, 4=door 4) # 78 40 Change Card Code Door Access All Doors 78 # (card code) # (facility code) # (card type, 26 or 30) # (door 0=any door, 1=door 1, 2=door 2, 3=door 3, 4=door 4) # 80 40 Add a Basic Card 80 (card PIN code) # (facility code) # (card type, 26 or 30) # Page 6