LiftMaster LA412 LA412 Manual - Page 23

WIRING » CONNECT THE GATE OPERATOR (GATE 2) TO THE CONTROL BOX (MODEL LA412-S ONLY) CONNECT THE GATE OPERATOR (GATE 2) TO THE CONTROL BOX (MODEL LA412-S ONLY) Before digging, contact local underground utility locating companies. 1 Trench across driveway to bury the extension cable. Use PVC conduit to prevent damage to cables. 2 Select hole in bottom of the control box to be used for the extension cable. Insert extension cable through watertight connector nut and through an available watertight connector mounted in the control box. 3 Extend cable and wires to Gate 2 connector and connect as shown. 4 Secure extension cable to control box using watertight connector nut. Solar Panel (Facing South) Control Box PTpDtKiMhlmeEoadiEyseneoPioeswnnttvCirtttliLiherhaIantEeonnncAusggcjhtRaumeiptl!GdeirursGriysaoeaaftrronteuteorwaoesmv.rapeereaChsnDryeiiacnaptmelgeean.oasrtahvottCeeehnaglaeytanutaternsayonerce Gate Operator (Gate 2) Junction Box Extension Cable PVC conduit at least 18" (45.7 cm) below ground level (grade) Gate Operator (Gate 1) 1 PVC conduit (not provided) to protect the power cable for solar panel and low voltage wire from lawn mowers and string trimmers. Terminal blocks can be removed to simplify wiring. 3 ACCESSORY APCCOEWSSEORRY POWER R9Ø R9Ø 242V4V P1 GATE 2 GATE 2 BRN BRN GRN WGHTRN YWELHT BLU YEL RED BLU RED R4 C2 D15 R196 24 VAC/ SOLAR INPUT U4 10A 32V 10A 32 MAX C13 C4 F6 F2 GATE 1 BRN GRN WHT YEL BLU RED GATE 2 BRN GRN WHT YEL BLU RED 2 Operator Cable R4 C2 D15 R196 C/ Control Box 4 Extension Cable PVC Conduit 22