LiftMaster LA412 LA412 Manual - Page 24
Junction Box (model La412-s Only), Junction Box
View all LiftMaster LA412 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
WIRING » JUNCTION BOX (MODEL LA412-S ONLY) JUNCTION BOX The following items are required to complete the junction box installation: • 4 x 4 Junction Box with 3/4" NPT threaded port holes • Screws • PVC Conduit 1 Open the junction box by removing screws (4) and set aside. 2 Mount the junction box within 3 feet (0.9 m) of second operator. Junction Box Cover 1 Screws (4) Junction Box 2 3 feeWtit(h0i.n9 m) Gate Operator (Gate 2) Junction Box Extension Cable 3 Route operator cable and extension cable through watertight connector nut and watertight connector. 4 Insert cables and watertight connectors into the holes in the bottom of the junction box (not provided). 5 Feed extension cable through PVC conduit and secure with nut. 23 3 5 PVC Conduit Watertight Connector Nut Operator Cable Watertight Connector Nut Junction Box (not provided) Nut Watertight Connector Extension Cable 4 Watertight Connector Nut PVC Conduit