LiftMaster MTF Installation Manual - Page 2

TABLE OF CONTENTS SAFETY 2-4 INSTALL THE DRIVE CHAIN 19 Safety Symbol and Signal Word Review UL325 Model Classifications UL325 Entrapment Protection Requirements Safety Installation Information 2 3 INSTALL THE TRAFFIC LIGHT 19 3 4 OPERATION AND MAINTENANCE 20 INTRODUCTION 5-6 Important Safety Instructions 20 General Service 20 Important Information for Installation of All Traffic Spike Systems 5 Shear Pin Replacement 20 Features, Tools Needed, and Operator Specifications 6 Battery 20 INSTALLATION Route the Conduit Install the Motorized Traffic Control Base and Extensions Attach the Operator to the Base Install the Barrier Arm 7-9 ADDITIONAL FEATURES 21-24 7 Suggested Loop Sensor Locations 21 7 Trap Instructions 22 9 Sequence Access Management System (SAMS) with "Memory" 23 9 Control Board Layout and Input Locations 24 WIRING 10-13 TROUBLESHOOTING 25 Earth Ground Rod 10 Battery Checkout 25 Power Wiring 10 Gate Not Operating 25 Inputs (J5 Terminal Strip) 11 Accessory and Relay Connections 12 REPAIR PARTS 25 Battery Installation 12 Part Numbers and Descriptions 26 Primary/Second Wiring 13 Parts Shipped 26 INSTALL THE RECEIVER 14-15 MATTS Unique Parts List MATTS Options Parts List 26 26 FEATURES AND FUNCTIONS 16-17 ACCESSORIES 27 S1 DIP Switches 16 Remote Controls 27 S2 DIP Switches 17 Miscellaneous 27 ADJUSTMENTS Sprint Operators Only 27 18 Instant Reverse Device (IRD) 18 WARRANTY POLICY 28 Adjust the Barrier Arm 18 SAFETY SAFETY SYMBOL AND SIGNAL WORD REVIEW When you see these Safety Symbols and Signal Words on the following pages, they will alert you to the possibility of serious injury or death if you do not comply with the warnings that accompany them. The hazard may come from something mechanical or from electric shock. Read the warnings carefully. When you see this Signal Word on the following pages, it will alert you to the possibility of damage to your gate and/or the gate operator if you do not comply with the cautionary statements that accompany it. Read them carefully. IMPORTANT NOTE: • BEFORE attempting to install, operate or maintain the operator, you must read and fully understand this manual and follow all safety instructions. • DO NOT attempt repair or service of your commercial door and gate operator unless you are an Authorized Service Technician. 2 MECHANICAL ELECTRICAL