LiftMaster Readers User Guide - Page 2

INTRODUCTION The LiftMaster KPR2000 is a single entry multi-function Access Controller with integrated keypad and card reader. It is designed and manufactured to perform in a wide range of indoor, outdoor, and harsh environments. The KPR2000 supports up to 2000 users in multiple access configurations (Card Only, Card or PIN, or Card + PIN). The built in 125 KHz card reader supports HID 26 bit Wiegand and 30 bit Sentex Wiegand proximity card formats. The KPR2000 offers advanced programming features like; block enrollment, advanced relay programming, and Panic PINs/Cards (which open the entry and set off the alarm). Features • Waterproof (IP68) (meets or exceeds N4) • Vandal Resistant Enclosure • Backlit Keypad • Multi-color LED status display • Integrated Alarm Buzzer & Output • One Programmable Relay Output • Stand Alone or Pass-Through Operation • 2000 Users (Card/PIN/Card+PIN) • 10 Panic Card/PIN Codes • Low power consumption (50mA) • Anti-Tamper Alarm • Latch Mode to hold door or gate open Accessories • Model PEDS44 Low Profile Access Pedestal • Model PEDAD 4 x 4 Pedestal Adaptor • Model PS12V2A 12 Vdc, 2 Amp Power Supply Carton Inventory NOT SHOWN: User's Manual Diode IN4007 (For Relay circuit protection) Manager Add Card Self Tapping Screws #8 x 1" Wall Anchors #6 x 1 1/8" Manager Delete Card KPR2000 Keypad/Proximity Reader/Controller Security Screwdriver (T-10 Security Torx Driver) Specifications User Capacity 2000 Cards/PINS plus 10 Panic Cards/PINS Operating Voltage 12 ~ 24 Vdc Idle Current 50mA Active Current 80mA Keypad 12 Key (3x4) Proximity Card Reader HID 26 bit and 30 bit (Sentex) Radio Technology 125 KHz Industry Standard Proximity Card Read Range 1 inch - 2.5 inches Wiring Connections Relay Output, REX, DOTL, Alarm, Wiegand (in/out) Relay One (NO, NC, Common) Adjustable Relay Output Time . . 1 ~ 99 Seconds (5 seconds default) Adjustable Alarm Output Time . . . . . 0 ~ 3 Minutes (1 minute default) Lock Output Load 1 Amp Maximum Alarm Output Load 1 Amp Maximum Wiegand Interface. . . HID Wiegand 26 and 30 bit Format Input & Output Environment Meets or exceeds IP68 Operating Temperature 20°C ~ 60°C, or -4°F ~ 140°F Operating Humidity 10% ~ 90% Non-Condensing Physical Zinc-Alloy Enclosure Surface Finish Powder Coat Dimensions L:128mm x W:82mm x D:28mm Unit Weight 1 Pound Shipping Weight 1.4 Pounds One Year Limited Warranty The Chamberlain Group, Inc. warrants to the first consumer purchaser of this product that it is free from defect in materials and/or workmanship for a period of 1 year from the date of purchase. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2