LiftMaster Readers User Guide - Page 8
ADVANCED PROGRAMMING, Alarm, Reset the KPR2000, Sound & Light Indication, Erase all Codes - red reset button
View all LiftMaster Readers manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ADVANCED PROGRAMMING Alarm TO RESET THE ALARM Programming Step Keystroke Combination To reset the door forced open warning (Read valid card) OR (Master Code #) To reset the door open too long (DOTL) warning (Read valid card) OR (Master Code) # ANTI-TAMPER ALARM The KPR2000 uses an optical sensor as the input for its internal alarm. If the case is opened while the KPR2000 is powered, the alarm will operate. To silence, enter a valid credential or cycle power. Reset the KPR2000 This will reset the KPR2000 to the factory default but all card/PIN information will still be retained. This will also require reprogramming of the Master Add and Delete Cards. NOTE: This is useful if the original Master Add and Delete Cards have been lost. 1. Power the KPR2000 down. 2. Press and hold the ✱ button while power is restored to the KPR2000. 3. Release the button and wait until the amber LED shines. 4. Present any 26 bit proximity card or the Manager Add Card (provided) to the KPR2000. This card is now the Manager Add Card. 5. Present any 26 bit proximity card or the Manager Delete Card (provided) to the KPR2000. This card is now the Manager Delete Card. When the red LED begins to blink, the KPR2000 has been successfully reset. Erase all Codes This will delete ALL User data. 1. Enter Program Mode by pressing: ✱ (Master Code) #. 2. Press 2 0000 #. All configuration data is retained. Sound & Light Indication Operation Status Power On Standby Press Keypad 5 Second Time-out Enter Master Code Entry Mode In Program Mode Entered Single Program Step Successfully Entered Continuous Program Step Successfully Entered Program Step Incorrectly Exited from Program Mode Entry Granted Alarm Mode Engaged Pressing ✱ Toggles Standby/Master Code Entry Red LED Flashing Flashing Flashing Flashing ON ON ON Flashing Flashing ON/Flashing Green LED Single Flash Single Flash Single Flash ON Amber LED ON ON Sounds Short Single Beep Short Single Beep 3 Short Beeps Short Single Beep Short Single Beep Short Single Beep Short Single Beep 3 Short Beeps Short Single Beep Short Single Beep Alarm Short Single Beep 01-36716B FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER: 1-800-528-2806 © 2012, The Chamberlain Group Inc. All Rights Reserved