LiftMaster Readers User Guide - Page 3

INSTALLATION 1 Install the KPR2000. 123 456 789 *0 # 2 Choose an Operation Mode. STAND ALONE OPERATION The KPR2000 functions as a complete access control system. The user database is stored in non-volatile memory, reads the PINs and card codes, performs the authentication, and grants and monitors access to the property or device. In Stand Alone Operation there are three different Access Configurations listed below: • Card or PIN (Default): The User must present a valid Wiegand Card to the KPR2000 or enter their PIN code followed by the # key, in order to be granted access. • Card Only: The User must present a valid Wiegand Card to the KPR2000 in order to be granted access. The facility code and the ID number are both read and validated as one block of Wiegand data. • Card + PIN: The User must first present a valid Wiegand Card to the KPR2000 and then enter their PIN code followed by the # key, in order to be granted access. PASS-THROUGH OPERATION The KPR2000 passes all keypad and card reader Wiegand data to an external controller. The KPR2000 should be in the "Card or PIN" access configuration for pass-through operation. IMPORTANT NOTE: Both modes of operation support Auto User ID generation (simplest method) and manual entry of user ID. 3