Linksys PLTE200 User Guide - Page 7

Chapter 2 Ports Panel of the Powerline 4-Port Network Adapter (model number: PLTS200) Product Overview Vertical Placement The stand fits only on the side panel adjacent to the Power port. Insert the stand into the side panel, and then place the Powerline Adapter on a level surface near an electrical outlet. Ethernet 1-4 These Ethernet ports (1, 2, 3, 4) connect to computers or other network devices. Power The Power port connects to the powerline end of the power cord. Placement Options There are three ways to place the Powerline Adapter. The first way is horizontal placement on a surface. The second way is vertical placement on a stand. The third way is wallmounting. Horizontal Placement Place the Powerline Adapter on a level surface near an electrical outlet. Powerline Network Adapter NOTE: When the Powerline Adapter is on the stand, the Power port is closest to the stand. Wall-Mounting Placement The Powerline Adapter has four wall-mount slots on its back panel. The distance between two adjacent slots is 60 mm (2.36 inches). Two screws are needed to mount the Powerline Adapter. Suggested Mounting Hardware 2-2.5 mm 4 mm 1-1.5 mm ††Note: Mounting hardware illustrations are not true to scale. NOTE: Linksys is not responsible for damages incurred by insecure wall-mounting hardware. Follow these instructions: 1. Determine where you want to mount the Powerline Adapter. Make sure that the wall you use is smooth, flat, dry, and sturdy. Also make sure the location is within reach of an electrical outlet. 2. Drill two holes into the wall. Make sure the holes are 60 mm (2.36 inches) apart. 4