Linksys WAP610N User Guide - Page 13

Chapter 3 ADDBA Timeout This option defines the duration after which the ADDBA setup is terminated, if there are no frame exchanges within this duration by the Block Acknowledgement (ACK) agreement. The range is 0 to 65535 ms. The default is 0, which disables the timeout. Aggregation Window Size This option defines the maximum number of packets transmitted without getting ACKs. The range is 0 to 64. The default is 64. CW Min for STA This option defines the minimum contention window limit from which the random backoff is computed for an STA in BSS. The value is set to 7 (default) and cannot be changed. CW Max for STA This option defines the maximum contention window limit from which the random backoff is computed for an STA in BSS. The value is set to 15 (default) and cannot be changed. AIFSN for STA This option defines the Arbitration Interframe Space Number for an STA in BSS. The range is 0 to 15. The default is 2. TXOP for STA This option defines the Transmission Opportunity for an STA in BSS. The range is 0 to 8192. The default is 3008. CW Min for AP This option defines the minimum contention window limits from which the random backoff is computed for AP. The value is set to 7 (default) and cannot be changed. CW Max for AP This option defines the maximum contention window limits from which the random backoff is computed for AP. The value is set to 15 (default) and cannot be changed. AIFSN for AP This option defines the Arbitration Interframe Space Number for AP. The range is 0 to 15. The default is 1. TXOP for AP This option defines the Transmission Opportunity for AP. The range is 0 to 8192. The default is 3008. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Voice Use Aggregation This option defines whether or not the Media Access Control (MAC) layer will set up an Add Block Acknowledgement (ADDBA) session. The default is Yes. Select No to disable this option. Accept Aggregation This option defines whether or not the MAC layer will accept an ADDBA request. The default is Yes. Select No to disable this option. Max. Number of Packets in Aggregation This option defines the maximum number of packets (sub-frames) in the aggregate. The range is 0 to 2. The default is 2. Wireless-N Access Point with Dual-Band Advanced Configuration Max. Aggregation Size This option defines the maximum size of the aggregate (in bytes). The range is 0 to 16000. The default is 10000. Timeout Interval This option defines the timeout period in which the aggregate should be closed with a "closing condition" before it is closed by the timer. The range is 0 to 100 ms. The default is 10. Min. Size of Packet in Aggregation This option defines the minimum size (in bytes) of packets to be accumulated in the aggregate. The range is 0 to 1500. The default is 10. ADDBA Timeout This option defines the duration after which the ADDBA setup is terminated, if there are no frame exchanges within this duration by the Block Acknowledgement (ACK) agreement. The range is 0 to 65535 ms. The default is 0, which disables the timeout. Aggregation Window Size This option defines the maximum number of packets transmitted without getting ACKs. The range is 0 to 64. The default is 64. CW Min for STA This option defines the minimum contention window limit from which the random backoff is computed for an STA in BSS. The value is set to 3 (default) and cannot be changed. CW Max for STA This option defines the maximum contention window limit from which the random backoff is computed for an STA in BSS. The value is set to 7 (default) and cannot be changed. AIFSN for STA This option defines the Arbitration Interframe Space Number for an STA in BSS. The range is 0 to 15. The default is 2. TXOP for STA This option defines the Transmission Opportunity for an STA in BSS. The range is 0 to 8192. The default is 1504. CW Min for AP This option defines the minimum contention window limits from which the random backoff is computed for AP. The value is set to 3 (default) and cannot be changed. CW Max for AP This option defines the maximum contention window limits from which the random backoff is computed for AP. The value is set to 7 (default) and cannot be changed. AIFSN for AP This option defines the Arbitration Interframe Space Number for AP. The range is 0 to 15. The default is 1. TXOP for AP This option defines the Transmission Opportunity for AP. The range is 0 to 8192. The default is 1504. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. 10