Linksys WPSM54G User Guide - Page 11

Chapter 3 WPA Personal Wireless > Security > WPA Personal > TKIP WPA Encryption Algorithm TKIP is the default algorithm. AES is also available. WPA Shared Key Enter your Shared Key, which must have 8-63 characters in length. Click the Save button to apply your changes, or click the Cancel button to cancel your changes. WEP Advanced Configuration Authentication Select your wireless network's authentication type. The default is Open System, for which the sender and the recipient do NOT use a WEP key for authentication. Select Shared Key if you want the sender and recipient to use a WEP key for authentication. Click the Save button to apply your changes, or click the Cancel button to cancel your changes. The Printer Tab > Scan By default, the computer that sent the print job will be disconnected one minute after the print job is completed. Use this screen to change the length of time the computer is connected to the printer. Click the Save button to apply your changes, or click the Cancel button to cancel your changes. Auto Disconnect Wireless > Security > WEP Default Transmit Key Select the Default Transmit Key used by your wireless network. This indicates which WEP key your network uses for WEP encryption. Passphrase Enter a Passphrase and click the Generate Keys button to automatically generate WEP Keys 1-4. The Passphrase is case-sensitive and should have 16 or fewer alphanumeric characters. It must match your wireless network's passphrase and is compatible with Linksys wireless products only. (Enter the WEP key manually on any non-Linksys wireless products.) Key 1 to Key 4 To enter WEP keys manually, leave the Passphrase field blank and enter your WEP keys. For 64‑bit WEP encryption, each key must have 10 hexadecimal characters, while for 128-bit WEP encryption, the key must have 26 hexadecimal characters. Valid hexadecimal characters are "0"-"9" and "A"-"F". Printer > Scan - Auto Disconnect 1 min after job completed To change the number of minutes before the computer is disconnected from the printer, enter the new number (1-60) in this field. Always connect If you want the computer to always be connected to the printer, select this option. Click the Save button to apply your changes, or click the Cancel button to cancel your changes. Wireless-G PrintServer 9