Linksys WPSM54G User Guide - Page 12

Chapter 3 The Printer Tab > Internet Printing Internet Printing allows you to automatically print any e-mails that are sent to a specific e-mail account on your network. This is especially useful for printing information when you are not connected to the network. You can print from any location where you can access e-mail. Printer > Internet Printing Mail Server Mail Server IP Address Enter the IP address of your mail server. (This value must be a fixed IP address.) Account Name and Password Enter the Account Name and Account Password. Verify Password Enter the Account Password again. Check Mail every Specify how often you want the PrintServer to check for e-mail to be printed. Redirect unprintable Mail to Specify an e-mail address to which e-mails that cannot be printed are routed; this is useful for both graphic-intensive e-mails and for troubleshooting purposes. Printer Printer Model Enter the Printer Model. You can find this through the Device Manager in your Windows operating system. Printer Port Choose the appropriate Printer Port from the drop-down menu: USB 1, the PrintServer's USB port, or Logical Printer 1-3. The PrintServer has three logical or virtual printer ports. For example, you can have three different configurations for your printer: Logical Printer 1 for landscape orientation, Logical Printer 2 for doublesided copies, and Logical Printer 3 for manual feed. Then configure the Logical Printers on the Logical Port tab, so Logical Printers 1, 2, and 3 will be mapped to the physical printer on the PrintServer's USB port. Wireless-G PrintServer Advanced Configuration Options Print every E-Mail Select this option if you want to print every e-mail message. Print Banner Page Enabled by default, this feature tells the PrintServer to print a banner page for every print job (the banner page describes the print job). Deselect this option to disable this feature. Mail response when printed Select this option if you want an e-mail sent when a print job is complete. Click the Save button to apply your changes, or click the Cancel button to cancel your changes. The Printer Tab > Logical Port Configure the settings of each Logical Printer. The PrintServer has three logical or virtual printer ports. For example, you can have three different configurations for your printer: Logical Printer 1 for landscape orientation, Logical Printer 2 for double-sided copies, and Logical Printer 3 for manual feed. Map Logical Printers 1, 2, and 3 to the physical printer on the PrintServer's USB port. Printer > Logical Port Select Printer Logical Printer No. Select the number (1-3) of the printer you wish to configure. Click the Get Data button to update the display with the current data for the selected logical printer. Details Pre-string (Hex) Enter the printer control string (in hexadecimal characters) to be sent to the printer before each print job. This string cannot exceed 30 characters. Post String (Hex) Enter the printer control string (in hexadecimal characters) to be sent to the printer after each print job. This string cannot exceed 30 characters. Convert LF to CR+LF Select this option if you want LF (line feed) characters changed to CR+LF (carriage return + line feed) characters. Click the Save button to apply your changes, or click the Cancel button to cancel your changes. 10