MSI K1 User Guide - Page 28
Hard Disk Connector: IDE, The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/66/100/133
View all MSI K1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
BATT + Hardware Setup Hard Disk Connector: IDE The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/66/100/133 controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 function. You can connect up to two hard disk drives, CD-ROM, 120MB Floppy (reserved for future BIOS) and other devices. The IDE can connect a Master and a Slave drive. You must configure second hard drive to Slave mode by setting the jumper accordingly. IDE NOTE If you install two hard disks on cable, you must configure the second drive to Slave mode by setting its jumper. Refer to the hard disk documentation supplied by hard disk vendors for jumper setting instructions. 2-9 BI OS
2-9
Hardware Setup
B
A
T
T
+
B
I
O
S
Hard Disk Connector: IDE
The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/66/100/133
controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 33/66/100/133
function. You can connect up to two hard disk drives, CD-ROM, 120MB Floppy
(reserved for future BIOS) and other devices.
The IDE can connect a Master and a Slave drive. You must configure second
hard drive to Slave mode by setting the jumper accordingly.
IDE
NOTE
If you install two hard disks on cable, you must configure the second
drive to Slave mode by setting its jumper. Refer to the hard disk docu-
mentation supplied by hard disk vendors for jumper setting instructions.