MSI MS5169 User Guide - Page 36

st Boot Device/2nd Boot Device/3rd Boot Device/4th Boot, Device, Try other Boot Devices, Quick Boot

Get MSI MS5169 - Motherboard - ATX PDF manuals and user guides View all MSI MS5169 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

CHAPTER 3 AMI® BIOS USER’S GUIDE Description of the item on screen follows: 1st Boot Device/2nd Boot Device/3rd Boot Device/4th Boot Device This option sets the sequence of boot drives. The settings are: IDE0 The system will boot from the first HDD. IDE1 The system will boot from the Second HDD. IDE2 The system will boot from the Third HDD. IDE3 The system will boot from the Fourth HDD. F(optical) The system will boot from LS-120(120M Floppy). SCSI The system will boot from the SCSI. Network The system will boot from the Network drive. CD-ROM The system will boot from the CD-ROM. Disable Disable this sequence. Try other Boot Devices This option sets the boot device, if all the Four Boot Devices failed. Quick Boot Set this option to Enabled to permit AMI® BIOS to boot within 8 seconds. This option replaces the old ABOVE 1 MB Memory Test option. The Optimal default setting is Enabled. The Fail-Safe default setting is Disabled. Boot up Num Lock When this option is set to Off, AMI® BIOS turns off the Num Lock key when the system is powered on. The end user can then use the arrow keys on both the numeric keypad and the keyboard. The settings are On or Off. The optimal default and Fail-Safe default settings are On. Floppy Drive Swap Set this option to Enabled to specify that floppy drives A: and B: are swapped. The setting are Enabled and Disabled. The Optimal and FailSafe default settings are Disabled. 3-6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
CHAPTER 3
AMI
®
BIOS USER±S GUIDE
3-6
Description of the item on screen follows:
1st Boot Device/2nd Boot Device/3rd Boot Device/4th Boot
Device
This option sets the sequence of boot drives.
The settings are:
IDE0
The system will boot from the first HDD.
IDE1
The system will boot from the Second HDD.
IDE2
The system will boot from the Third HDD.
IDE3
The system will boot from the Fourth HDD.
F(optical)
The system will boot from LS-120(120M Floppy).
SCSI
The system will boot from the SCSI.
Network
The system will boot from the Network drive.
CD-ROM
The system will boot from the CD-ROM.
Disable
Disable this sequence.
Try other Boot Devices
This option sets the boot device, if all the Four Boot Devices failed.
Quick Boot
Set this option to Enabled to permit AMI
®
BIOS to boot within 8
seconds.
This option replaces the old ABOVE 1 MB Memory Test option.
The Optimal default setting is Enabled.
The Fail-Safe default setting is
Disabled.
Boot up Num Lock
When this option is set to Off, AMI
®
BIOS turns off the Num Lock
key when the system is powered on.
The end user can then use the arrow
keys on both the numeric keypad and the keyboard.
The settings are On or
Off.
The optimal default and Fail-Safe default settings are On.
Floppy Drive Swap
Set this option to Enabled to specify that floppy drives A: and B:
are swapped.
The setting are Enabled and Disabled.
The Optimal and Fail-
Safe default settings are Disabled.