MSI MS5169 User Guide - Page 37

Floppy Drive Seek, Floppy Access Control, HDD Access Control, Mouse Support, Password Check, Primary

Get MSI MS5169 - Motherboard - ATX PDF manuals and user guides View all MSI MS5169 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

CHAPTER 3 AMI® BIOS USER’S GUIDE Floppy Drive Seek When this option is set to Enabled, AMI® BIOS performs a Seek command on floppy drive A: before booting the system. The settings are Enabled and Disabled. The Optimal and Fail-Safe default settings are Disabled. Floppy Access Control This option sets the Floppy to Read-only or Read-Write. HDD Access Control This option sets the HDD to Read-only or Read-Write. During Read-only, if you try to write on the HDD, the system will halt. PS/2® Mouse Support When this option is set to Enabled, AMI® BIOS supports a PS/2® mouse. The settings are Enabled and Disabled. The Optimal and Fail-Safe default settings are Enabled. Password Check This option specifies the type of AMI® BIOS password protection that is implemented. The Optimal and Fail-Safe default settings are Setup. Primary Display This option configures the primary display subsystem in the computer. The settings are Mono(monochrome), 40CGA, 80CGA, or VGA/ EGA. The Optimal and Fail-Safe default settings are VGA/EGA. Boot to OS/2 Set this option to Enabled to permit the BIOS to run properly, if OS/2® is to be used with > 64MB of DRAM. The settings are Enabled or Disabled. The Optimal and Fail-safe default settings are Disabled. External Cache This option Enabled or Disabled the External Cache. 3-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
CHAPTER 3
AMI
®
BIOS USER±S GUIDE
3-7
Floppy Drive Seek
When this option is set to Enabled, AMI
®
BIOS performs a Seek
command on floppy drive A: before booting the system.
The settings are
Enabled and Disabled.
The Optimal and Fail-Safe default settings are
Disabled.
Floppy Access Control
This option sets the Floppy to Read-only or Read-Write.
HDD Access Control
This option sets the HDD to Read-only or Read-Write. During
Read-only, if you try to write on the HDD, the system will halt.
PS/2
®
Mouse Support
When this option is set to Enabled, AMI
®
BIOS supports a PS/2
®
mouse.
The settings are Enabled and Disabled.
The Optimal and Fail-Safe
default settings are Enabled.
Password Check
This option specifies the type of AMI
®
BIOS password protection
that is implemented.
The Optimal and Fail-Safe default settings are Setup.
Primary Display
This option configures the primary display subsystem in the
computer.
The settings are Mono(monochrome), 40CGA, 80CGA, or VGA/
EGA.
The Optimal and Fail-Safe default settings are VGA/EGA.
Boot to OS/2
Set this option to Enabled to permit the BIOS to run properly, if
OS/2
®
is to be used with > 64MB of DRAM.
The settings are Enabled or
Disabled.
The Optimal and Fail-safe default settings are Disabled.
External Cache
This option Enabled or Disabled the External Cache.