MSI X299 SLI PLUS User Manual - Page 42
CPU_FAN1, PUMP_FAN1, SYS_FAN1~4: Fan Connectors, JTBT1: Thunderbolt Add-on Card Connector
![]() |
View all MSI X299 SLI PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
CPU_FAN1, PUMP_FAN1, SYS_FAN1~4: Fan Connectors Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage. When you plug a 3-pin (Non-PWM) fan to a fan connector in PWM mode, the fan speed will always maintain at 100%, which might create a lot of noise. You can follow the instruction below to adjust the fan connector to PWM or DC Mode. Automatically detect mode fan connectors 1 CPU_FAN1/ PUMP_FAN1/ Default DC Mode fan connectors 1 SYS_FAN1/ SYS_FAN2/ SYS_FAN3/ SYS_FAN4 Important y You can switch between PWM mode and DC mode and adjust fan speed in BIOS > HARDWARE MONITOR. y Make sure fans are working properly after switching the PWM/ DC mode. Pin definition of fan connectors PWM Mode pin definition 1 Ground 2 +12V 3 Sense 4 Speed Control Signal DC Mode pin definition 1 Ground 2 Voltage Control 3 Sense 4 NC JTBT1: Thunderbolt Add-on Card Connector This connector allows you to connect the add-on Thunderbolt I/O card. 1 1 FORCE_PWR 2 3 SLP_S3# 4 5 GND SCI_EVENT SLP_S5# 42 Overview of Components
![](/manual_guide/products/msi-x299-sli-plus-user-manual-a615953/42.png)