MSI X79A User Guide - Page 57
Restore after AC Power Loss
View all MSI X79A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 2 MS-7760 ▶ HPET The HPET (High Precision Event Timers) is a component that is part of the chipset. You can enable it, and will provide you with the means to get to it via the various ACPI methods. ▶ USB Configuration Press to enter the sub-menu. ▶ USB Controller This item allows you to enable/ disable the integrated USB 2.0 controller. ▶ Legacy USB Support Enable or disable support for USB keyboards, mice and floppy drives. You will be able to use these devices with operating systems that do not support USB. ▶ Onboard USB 3.0 Controller This item allows you to enable/ disable the USB 3.0 controller. ▶ Hardware Monitor Press to enter the sub-menu. ▶ CPU Smart Fan Target Controls CPU fan speed automatically depending on the current temperature and to keep it with a specific range. If the current CPU temperature reaches the target value, the smart fan function will be activated. ▶ Power Management Setup Press to enter the sub-menu. ▶ EuP 2013 Energy Using Products Lot 6 2013 (EUP) reduces power consumption when system is off or in standby mode. Note: When enabled, the system will not support RTC wake up event functions. ▶ Restore after AC Power Loss This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are: [Power Off] Always leaves the computer in the power off state. [Power On] Always leaves the computer in the power on state. [Last State] Restore the system to the status before power failure or interrupt occurred. 2-7