MSI X99A SLI User Manual - Page 66
CPU Vdroop Offset Control [Auto], CPU Over Voltage Protection [Auto]
View all MSI X99A SLI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
f Memory Fast Boot [Auto] Enables or disables the initiation and training for memory every booting. [Auto] The setting will be configured automatically by BIOS. [Enabled] System will completely keep the archives of first intiation and training for memory. So the memory will not be initialed and trained when booting to accelerate the system booting time. [Disabled] The memory will be initialed and trained every booting. f DigitALL Power Press Enter to enter the sub-menu. Controls the digital powers related to CPU PWM. fVR 12VIN OCP Expander [Auto] Expands the limitation of VR Over Current Protection with 12V input voltage. The higher expanding value indicates less protection. Therefore, please adjust the current carefully if needed, or it may damage the CPU/ VR MOS. If set to"Auto", BIOS will configure this setting automatically. fCPU Phase Control [Auto] Controls PWM phase proportionally to the CPU loading. If set to"Auto", BIOS will optimize the CPU PWM phase automatically. [Auto] This setting will be configured automatically by BIOS. [Normal] Sets the normal power phase profile for CPU, it could provide a stable system performance and effective power-saving capability. [Optimized] Sets the optimum power phase profile for CPU, it could provide the system with an optimum power-saving capability. [Disabled] Disables the PWM power phase switching feature. fCPU Vdroop Offset Control [Auto] Sets a percentage of offset voltage for CPU vdroop. If set to"Auto", BIOS will configure this setting automatically. fCPU Over Voltage Protection [Auto] Sets the voltage limit for CPU over-voltage protection. If set to"Auto", BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system. fCPU Under Voltage Protection [Auto] Sets the voltage limit for CPU under-voltage protection. If set to"Auto", BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system. fCPU Over Current Protection [Auto] Sets the current limit for CPU over-current protection. If set to"Auto", BIOS will configure this setting automatically. Higher values provides less protection and may damage the system. fCPU Switching Frequency [Auto] Sets the PWM working speed to stabilize CPU Core voltage and minimize ripple range. Increasing the PWM working speed will cause higher temperature of MOSFET. So please make sure a cooling solution is well-prepared for MOSFET before you increase the value. If set to"Auto", BIOS will configure this setting automatically. 66 BIOS Setup