MSI Z68A User Guide - Page 56
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2 Speed
View all MSI Z68A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
BIOS Setup ▶ Onboard USB 3.0 Controller This item allows you to enable/ disable the USB 3.0 controller. ▶ USB3.0 Legacy Mode Support Select [Enabled] if you need to use a USB3.0-interfaced device in the operating system. ▶ Super IO Configuration Press to enter the sub-menu. ▶ Serial(COM) Port 0 Configuration Press to enter the sub-menu. ▶ Serial(COM) Port0 This item allows you to enable/ disable the serial port. ▶ Serial(COM) Port0 Settings Select an address and corresponding interrupt for the serial port. ▶ H/W Monitor Press to enter the sub-menu. ▶ CPU Smart Fan Target The Smart Fan function controls the CPU fan speed automatically depending on the current temperature to keep it with in a specific range. You can enable a fan target value here. If the current CPU fan temperature reaches to the target value, the smart fan function will be activated. ▶ SYS Fan 1/ 2 Control These items allow users to select how percentage of speed for the SYSFAN1/ 2. ▶ CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2 Speed These items show the current status of all of the monitored hardware devices/components such as CPU voltage, temperatures and all fans' speeds. ▶ Power Management Setup Press to enter the sub-menu. ▶ EuP 2013 This item is designed for Energy Using Products Lot 6 2013 (EuP) aka Energy Related Products (ErP). To reduce Power Consumption when system off or standby mode. Note: When "Enabled" EuP 2013 setting, system don't support RTC wake up event function. 3-18