Mackie Onyx 820i Owner's Manual - Page 31

Appendix C: Technical Information

Page 31 highlights

Appendix C: Technical Information Specifications Noise Characteristics: Equivalent Input Noise (EIN), mic input at insert, 150 Ω source impedance, 20 to 20 kHz: 60 dB (max) gain: 40 dB gain: -127 dBu -126.5 dBu Equivalent Input Noise (EIN), mic input at insert, 50 Ω source impedance, A-weighted: 60 dB (max) gain: -130.5 dBu 40 dB gain: -130 dBu Output Noise Figure (1/4" Main out, all channels assigned to main, Gain knobs at unity, 20 Hz to 30 kHz): Main Mix knob down, channel Level knobs down: -107 dBu (-111 dB SNR, ref +4 dBu) Main Mix knob unity, channel Level knobs down: -95.5 dBu (-99.5 dB SNR, ref +4 dBu) Main Mix knob unity, channel Level knobs unity: -91.5 dBu (-95.5 dB SNR, ref +4 dBu) FireWire Through (Record + Playback) Dynamic Range: 0 dBu mic input, to DAW, routed back to mixer direct to Control Room, all gain stages unity, 20 Hz to 20 kHz: 44.1 kHz sample rate: -104 dB 96 kHz sample rate: -106.5 dB Frequency Response: Mic input to any output (all gain stages at unity): +0/-0.5 dB, 20 Hz to 20 kHz Stereo channel line input to any output (all gain stages unity): +0/-0.5 dB, 20 Hz to 20 kHz FireWire in and out (mic input to FireWire send, returned to Control Room, all gain stages at unity): 44.1 kHz sample rate: +/-0.5 dB, 20 Hz to 20 kHz -3 dB at 21 kHz 96 kHz sample rate: +/-0.5 dB, 20 Hz to 20 kHz -3 dB at 45 kHz Distortion (THD+N): 20 Hz to 20 kHz, 20 Hz to 80 kHz bandwidth Mic input at insert (+4 dBu in, 0 dB gain, +4 dBu out): 0.001% Mic input at insert (-36 dBu in, +40 dB gain, +4 dBu out): 0.007% Stereo channel line input to any output (+4 dBu in, all gain stages at unity +4 dBu out): 0.005% FireWire in and out (+4 dBu in, mic input to FireWire send, returned to Control Room, all gain stages at unity): 44.1 kHz sample rate: 0.01%, 20 Hz to 2 kHz 0.02%, 2 kHz to 20 kHz 96 kHz sample rate: 0.01%, 10 Hz to 1 kHz 0.03%, 1 kHz to 47 kHz Attenuation and Crosstalk: 1 kHz relative to 0 dBu, 20 Hz to 20 kHz Main Mix knob down: -80 dBu Channel Alt/Mute switch engaged: -90 dBu Channel Level knob down: -80 dBu Common Mode Rejection Ratio (CMRR): Mic input to insert, max gain, 1 kHz, 150 ohm termination: -70 dB Maximum Input Levels: Mic input, gain at min (0 dB): Mic input, gain at max (60 dB): Line input, gain at -20 dB: Instrument input, gain at -20 dB: Tape input: Aux return: +22 dBu -38 dBu +22 dBu +22 dBu +12 dBu +22 dBu Maximum Output Levels: All outputs: +22 dBu Equalization Mono Channels Low: Mid frequency: Mid gain: High: Hybrid Channel: Low: Low Mid: High Mid: High: Stereo Channels: Low: Mid: High: ±15 dB at 80 Hz 100 Hz to 8 kHz ±15 dB ±15 dB at 12 kHz ±15 dB at 80 Hz ±15 dB at 400 Hz ±15 dB at 2.5 kHz ±15 dB at 12 kHz ±15 dB at 80 Hz ±15 dB at 2.5 kHz ±15 dB at 12 kHz FireWire Sample Rates Available: Buffer Size: Resolution: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz 32 (44.1 kHz and 48 kHz only), 64, 128, 256, 512, 1024, 2048 samples 24-bit Owner's Manual 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

Owner's Manual
31
Appendix C: Technical Information
Specifications
Noise Characteristics:
Equivalent Input Noise (EIN), mic input at insert, 150
Ω
source
impedance, 20 to 20 kHz:
60 dB (max) gain:
-127 dBu
40 dB gain:
-126.5 dBu
Equivalent Input Noise (EIN), mic input at insert, 50
Ω
source
impedance, A-weighted:
60 dB (max) gain:
-130.5 dBu
40 dB gain:
-130 dBu
Output Noise Figure (1/4" Main out, all channels assigned to
main, Gain knobs at unity, 20 Hz to 30 kHz):
Main Mix knob down, channel Level knobs down:
-107 dBu (-111 dB SNR,
ref +4 dBu)
Main Mix knob unity, channel Level knobs down:
-95.5 dBu (-99.5 dB
SNR, ref +4 dBu)
Main Mix knob unity, channel Level knobs unity:
-91.5 dBu (-95.5 dB
SNR, ref +4 dBu)
FireWire Through (Record + Playback) Dynamic Range:
0 dBu mic input, to DAW, routed back to mixer direct to Control
Room, all gain stages unity, 20 Hz to 20 kHz:
44.1 kHz sample rate:
-104 dB
96 kHz sample rate:
-106.5 dB
Frequency Response:
Mic input to any output (all gain stages at unity):
+0/-0.5 dB,
20 Hz to 20 kHz
Stereo channel line input to any output (all gain stages unity):
+0/-0.5 dB,
20 Hz to 20 kHz
FireWire in and out (mic input to FireWire send, returned to
Control Room, all gain stages at unity):
44.1 kHz sample rate:
+/-0.5 dB,
20 Hz to 20 kHz
-3 dB at 21 kHz
96 kHz sample rate:
+/-0.5 dB,
20 Hz to 20 kHz
-3 dB at 45 kHz
Distortion (THD+N):
20 Hz to 20 kHz, 20 Hz to 80 kHz bandwidth
Mic input at insert
(+4 dBu in, 0 dB gain, +4 dBu out):
0.001%
Mic input at insert
(-36 dBu in, +40 dB gain, +4 dBu out): 0.007%
Stereo channel line input to any output
(+4 dBu in, all gain stages at unity +4 dBu out): 0.005%
FireWire in and out (+4 dBu in, mic input to FireWire send,
returned to Control Room, all gain stages at unity):
44.1 kHz sample rate:
0.01%, 20 Hz to 2 kHz
0.02%, 2 kHz to 20 kHz
96 kHz sample rate:
0.01%, 10 Hz to 1 kHz
0.03%, 1 kHz to 47 kHz
Attenuation and Crosstalk:
1 kHz relative to 0 dBu, 20 Hz to 20 kHz
Main Mix knob down:
-80 dBu
Channel Alt/Mute switch engaged:
-90 dBu
Channel Level knob down:
-80 dBu
Common Mode Rejection Ratio (CMRR):
Mic input to insert, max gain, 1 kHz, 150 ohm termination:
-70 dB
Maximum Input Levels:
Mic input, gain at min (0 dB):
+22 dBu
Mic input, gain at max (60 dB):
–38 dBu
Line input, gain at -20 dB:
+22 dBu
Instrument input, gain at -20 dB:
+22 dBu
Tape input:
+12 dBu
Aux return:
+22 dBu
Maximum Output Levels:
All outputs:
+22 dBu
Equalization
Mono Channels
Low:
±15 dB at 80 Hz
Mid frequency:
100 Hz to 8 kHz
Mid gain:
±15 dB
High:
±15 dB at 12 kHz
Hybrid Channel:
Low:
±15 dB at 80 Hz
Low Mid:
±15 dB at 400 Hz
High Mid:
±15 dB at 2.5 kHz
High:
±15 dB at 12 kHz
Stereo Channels:
Low:
±15 dB at 80 Hz
Mid:
±15 dB at 2.5 kHz
High:
±15 dB at 12 kHz
FireWire
Sample Rates Available:
44.1 kHz, 48 kHz,
88.2 kHz, 96 kHz
Buffer Size:
32 (44.1 kHz and 48 kHz
only), 64, 128, 256, 512,
1024, 2048 samples
Resolution:
24-bit