Magnavox 40MF401B Owners Manual - Page 17

English 17 INTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS CONNECTING DEVICES TV Speakers Select the audio output from the unit's speakers, or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit's remote control. Make sure [fun-Link Control] is set to [On]. ➠ p.22 Use ▲/▼ to select the desired option, then press OK. On The sound will be output from the unit's speakers. Off The sound will not be output from the unit's speakers. Ext. Amp You can control audio output from your connected HDMI link devices by using this unit's remote control. Note • We do not guarantee 100% interoperability with other brands of HDMI link compliant devices. • [Unmute] may be displayed on the TV screen when you recover the volume from your amplifier. Primary MTS You can set the output mode as a default for the sound mode (NTSC only). This setting is not interlocked when you change the output mode by pressing SAP. [Sound Functions] ➠ p.13 Use ▲/▼ to select the desired option, then press OK. Stereo Outputs stereo-audio. Mono Outputs mono-audio. SAP Outputs second audio program. Setup Before you begin: Make sure the unit is connected to antenna or cable. 1 Use ▲/▼ to select the item you want to adjust, then press OK. Picture Sound Setup Features Language USB Autoprogram Channel List Add Channels Antenna Autoprogram If you switch wires (e.g. between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channels you deleted, it is recommended to use Autoprogram to perform a new channel search. 1 Use ▲/▼ to select [Autoprogram], then press OK. 2 Use ▲/▼ to select an appropriate option, then press OK. Picture Sound Setup Features Language USB Autoprogram will rescan all channels. Auto programming may take more than 20 minutes to complete. Select your signal source. Antenna Back Antenna Cable Cable Or ANT.IN • When connected to VHF / UHF antenna, select [Antenna]. • When connected to CATV, select [Cable]. • [Autoprogram] will begin. Please wait while the system is scanning for channels. Auto programming may take more than 20 minutes to complete. 75% Digital channels Analog channels 10 ch 6 ch MENU Exit • When the scanning and memorizing are completed, the lowest memorized channel will be displayed. Note • After setting [Autoprogram], using CH+/− on the remote control skips unavailable programs automatically. • If you are not receiving a signal from your cable service, contact the Cable provider. • If you press or MENU during autoprogram, the setup of TV channels will be canceled. • Even if [Autoprogram] is completed, the channel setting will be lost if the AC power cord is unplugged before the unit goes into standby mode by pressing . • The PIN code will be required once you set a PIN code in the [Child Lock]. ➠ p.20 • If you want to change your PIN code, follow the instruction of [Change PIN]. ➠ p.21 USEFUL TIPS INFORMATION 2 Adjust the following items.