Magnavox 50MV336X/F7 Owners Manual English - Page 43
Update software, Preparing for the Software upgrade, Downloading the Software, USB upgrade - model number
View all Magnavox 50MV336X/F7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Update software MAGNAVOX continuously tries to improve its products and we strongly recommend that you upgrade the TV software when upgrades are available. New software can be downloaded from our website at www.magnavox.com/support/download using the model number of your TV to find information. You can update the software through these methods: ● update with USB Memory Stick ● update from digital broadcast Software auto-update L p. 44 This section describes how to upgrade the software by using USB Memory Stick. Preparing for the Software upgrade You require the following equipment: - A PC with web browsing capability - An archive utility that supports the ZIP-format (e.g. WinZip for Windows or StuffIt for Mac OS) - An empty clean formatted USB Memory Stick Note(s) ● Only FAT / DOS-formatted portable memory is supported. ● Use only software upgrades that can be found on the MAGNAVOX web site. Warning ● When the software upgrade is running, don't press any buttons. ● Do not remove the USB Memory Stick during the software upgrade. ● If an error occurs during the upgrade, retry the procedure or for further assistance, please contact Call Center. Downloading the Software Find information and software related to your TV and download the latest software upgrade file to your PC. Prepare a blank USB memory stick for Software Update. Access www.magnavox.com/support/download and download the latest version software to a blank USB memory stick using a PC by following the Directions described on the website. ● Use a blank USB memory stick, download the software on your PC and write the software in the root directory of the USB memory stick. ● For more details on how to download the software, please refer to the website. 43 .English USB upgrade You can upgrade the software by using USB Memory Stick. 1 Connect your USB Memory Stick with the upgrade file to the USB terminal on the side of your TV. 2 Press Z and use J K to Select Setup then press OK. 3 Use H I J K to Select Update software, then press OK. 4 Use H I to Select USB, then press OK. 5 Use H I J K to Select the desired update file, then press OK. 6 Use J K to Select Yes, then press OK. ● Read the on-screen instructions and confirm that you want to continue with the installation. Software update is in progress. Please wait. Do not remove the USB storage device or turn the TV off while upgrade is in progress. 7 When the software upgrade is completed, press B to set the unit into Standby mode, then remove the USB Memory Stick. 8 Unplug the AC power cord for a few seconds from AC outlet and plug it again. 9 Press B again to Turn the unit On. ● The TV starts up with the new software. ● For further assistance, please contact Call Center. Continued on next page.