Magnavox MDV437 User manual, English (US) - Page 13

English Connecting to a stereo system Optional connections Connecting to a digital AV receiver STE RE O AUDIO IN DIGITAL AV Receiver AUDIO IN DIGITAL DIGITAL OUT TV OUT AUDIO OUT COAXIAL COMPONENT VIDEO OUT DIGITAL OUT TV OUT AUDIO OUT COAXIAL COMPONENT VIDEO OUT Stereo system has right/ left Audio In jacks A Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your television. B Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied). Receiver has a PCM, Dolby Digital or MPEG decoder A Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your television. B Connect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your receiver (cable not supplied). C Set the DVD player's digital output to PCM-Only or ALL depending on the capabilities of your receiver (see page 32 {Digital Output}). Tip: - If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. 13 01-43_MDV437_37_eng.indCd a1u3 tion: Do not touch the inner pins of the jacks on the rear panel.2007-01-31 4:49:46 PM Electrostatis dischar e ma ca se permanent dama e to the s stem