Magnavox MDV437 User manual, English (US) - Page 16

English Getting Started Step 1 : Inserting Batteries Step 2 : Finding your viewing channel A Open the battery compartment. B Insert two batteries type R03 or AAA, following the indications (+ -) inside the compartment. C Close the cover. CAUTION! - Remove batteries if they are exhausted or if the remote is not to be used for a long time. - Do not use old and new or different types of batteries in combination. - Batteries contain chemical substances, so they should be disposed of properly. Using the remote control to operate the system A Press STANDBY-ON 2 on the DVD player to turn it on. B Turn on the TV and set it to the correct video-in channel. You should see the blue DVD background screen. Usually these channel are between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO. See your TV's manual for more details. Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. Or, the TV remote control may have a button or turn that chooses different video modes. Or, set the TV to channel 3 or 4 if you are using an RF modulator. C If you are using external equipment, (such as audio system or receiver), turn it on and select the appropriate input source for the DVD player output. Refer to the equipment user's manual for detail. A Aim the remote control directly at the remote sensor (IR) on the front panel. B Do not put any objects between the remote control and the DVD player while operating the DVD player. 16 01-43_MDV437_37_eng.indd 16 2007-01-31 4:49:46 PM