Magnavox MFX450 User manual, English (US) - Page 16

English MFX450_eng 11/26/02 3:21 AM Page 15 Receiver adjustment Once the number and position of loudspeakers has been fixed, you can adjust the initial receiver settings for optimum surround sound with the actual setup: 1 Set which speakers have been connected to the receiver (see "Menus / SPEAKR SETUP"). Note: The initial setting of your receiver is: two front speakers left and right: present (cannot be altered) center speaker: present two rear speakers: present subwoofer: present 2 Select the size of the speakers (SMALL or LARGE) (see "Menus / SPEAKR SIZES"). Select SMALL if your speaker is able to reproduce low notes down to at least 80-100 Hz. Select LARGE if your speaker is able to reproduce low notes down to at least 50 Hz. (As a rule of thumb, a LARGE speaker has a cone diameter of at least 12 cms (5 inches).) See the specification sheets of your loudspeakers. Note: The initial setting of your receiver is: all speakers: SMALL 3 Set the distance from the speakers to the listener's position (see "Menus / SPK DISTANCE"). Note: The initial setting of your receiver is: front speakers, left and right: 13 feet (4 meters) center speaker: 10 feet (3 meters) rear speakers, left and right: 7 feet (2 meters) SYSTEM SETUP 15