Magnavox MRD250S98 User manual, English (US) - Page 12

mrd250book 2/14/03 10:49 AM Page 12 Hookups - TV (cont'd) 12 Connecting to a TV with Component Video In Jacks 2 FR FL C SR SL SPEAKERS (8‰) CENTER LINE OUT WOOFER LINE OUT AUDIO OUT AUDIO IN VIDEO OUT L AM/FM ANTENA R AM TV AUX S- VIDEO OUT FM (75‰) 1 3 Pr/Cr Pb/Cb Y COAXIAL OPTICAL COMPONENT VIDEO OUT DIGITAL OUT 1 Connect the DVD Receiver's Pr/Cr Pb/Cb Y COMPONENT VIDEO OUT jacks to the matching Pr/Cr Pb/Cb Y VIDEO IN jacks on the TV. You will need a component video cable (Green-Y; BluePb/Cb; Red- Pr/Cr) (not supplied). Match the cable colors to the jack colors. 2 To hear TV channels through the DVD Home Cinema System, connect the supplied red and white audio cables to the DVD Receiver's red/white, right/left (TV) AUDIO IN jacks and to the TV'S right/left AUDIO OUT jacks. Match the cable colors to the jack colors. 3 Connect the power cords of the DVD Receiver and TV to a power outlet. 4 Turn on the TV and set it to the correct Component Video In channel. Go to the lowest TV channel and change channels down until you find the Component Video In channel. (It is not channel 3 or 4 as it might be when using a VCR.) See your TV owner's manual for details. 5 Press STANDBY-ON y on the front of the DVD Receiver to turn on the DVD Receiver. The red Standby light will disappear. 6 Set VIDEO OUT to PR PB Y. Details are on page 22. -- GENERAL PAGE -- TV DISPLAY ANGLE MARK OSD LANG VIDEO OUT SCR SAVER MAIN PAGE SET VIDEO OUTPUT S-VIDEO CR CB Y Helpful Hint • On the TV, the Component Video In jacks may be labeled YUV or Pr/Cr Pb/Cb Y and may be red, blue, and green.