Marantz PMD340 User Guide - Page 21

ENGLISH ENGLISH FRANCAIS FRANCAIS Using the Preset Menu Changing the Preset Settings Procedure 1. Press the button !3 to put the CD player in the stopped mode. 2. Press the PRESET button !0. The /ENTER button !7 light. 3. An item that can be set as a preset appears on the display E. (Refer to the Preset menu table for a list of these items.) 4. Press the PRESET button !0 in order to scroll through the preset items. Tip: It is also possible to scroll through the items by pressing the INDEX+ button @4 or the INDEX- button @1. 5. Use the button !2 or the button !4 to change the setting of the displayed preset. At this point, the /ENTER button !7 changes from being steadily lit to flashing. 6. Press the /ENTER button !7 to confirm the selection. At this point, the /ENTER button !7 changes from being flashing to steadily lit. ENTER ENTER Tip: Press the CUE/CLEAR button !5 to cancel a setting before it is confirmed. Note: If "D.OUT" is set to "On," the instant start, shockproof, and pitch bend functions will not work. ESPANOL ESPANOL PORTUGUES PORTUGUES DEUTSCH DEUTSCH ITALINO ITALINO ENTER ENTER Preset Menu Chart: Functions, LCD Display, and Initial Values No. Presetting items / Function LCD Display 1 Selects the Auto Cue function. If this item is set to "On", Auto Cue: the CD sync function will not work. 2 Selects the sound level at which the Auto Cue function AC Lev: operates. 3 Selects the End Monitor playing time. END Mon: 4 Selects the time at which END starts to flash. END Warn: 5 Selects the fade-in time. FadeIn: 6 Selects the fade-out time. FadeOut: 7 Selects the delay when going from paused to the start Delay: of playing. 8 Selects the time display mode when the power is turned on. Time: 9 Enables/disables key lock. KeyLock: When key lock is "On", only the POWER q and PRESET !0 buttons function. 10 Selects whether to enable or disable control buttons during FaderLok: playback that was initiated using "fader start." During playback, only the POWERq,TIME u and TEXT i buttons can be used. All buttons can be used when playback is paused. 11 Enables/disables the OPEN/CLOSE button while playing. TrayLock: 12 Selects the auto close time for the disc tray. AutoCLS: 13 Selects the operation that is performed after a disc is loaded Start: in the disc tray and after a track is selected. Refer to page 7 for a complete explanation of each setting. 14 Selects the wait time before the CD player enters auto AutoSTBY: standby. *15 Selects whether to output digital signals or not. D.OUT: If this item is set to "ON," the instant start, shockproof, and pitch bend functions will not work. 16 Enables/disables the Control I/O (D-sub 25-pin) ⁄0 input jack Remote: (PMD331/PMD340) or the fader start input jack (PMD330)c. 17 Enables/disables the CD Sync function. CD Sync: Selects whether to output the CD Sync signal through the RC5 jack b when playback starts. Turn Auto Cue (preset #1) "Off" to utilize the CD sync function. *18 Selects which Index (#2 or #3) will trigger an output on Index: pin #11 on the Control I/O Port. 19 Selects whether or not to display a warning when a skip Alert: occurs as a result of a bad CD. 20 Selects the CD-TEXT display language. Text: 21 Selects whether or not to restore the original presets. Reset?: The settings shown in (bold) are the initial settings. On Off - 40dB, - 90dB to - 35dB in 5dB Steps 5s 10s 15s 20s 25s 30s 35s 0s 5s 10s 15s 20s 25s 30s 35s 0s to 8.0s in 0.5s Steps 0s to 8.0s in 0.5s Steps 0ms 100ms 200ms 300ms 400ms Trk REM Trk ELP Dsc REM Dsc ELP Dsc TTL Track Track Disc Disc Remain Elapsed Remain Elapsed Disc Total Off On Off On On Off Off 10s 30s 60s 180s Pause Play Stop 30m 30min 20m 20min Off 10m 10min 30sec 30s On On Off Off On #2 Off English French No #3 On Spanish German Yes * Those items marked with an asterisk can only be selected on the PMD331/PMD340. They are not displayed on the PMD330. 17 NEDERLANDS NEDERLANDS SVENSKA SVENSKA DANSK DANSK