Marantz SA-10 All-new SACD-M3 transport mechanism for CD SACD and mor - Page 11

Overview Connections Connecting a PC or Mac By connecting a computer to the USB port (USB-DAC) on the rear panel of this unit using a commercially available USB cable (Sold separately), this unit can be used as a D/A converter. (v p. 20) USB 2.0 cable (Sold separately) Type A Type B Computer on which the driver software and audio player software are installed . 0 Before USB connecting this unit to your computer, install the driver software in your computer. (v p. 20) 0 Download the driver software from the SA-10 page of the Marantz website. NOTE 0 Use a cable that is 10 ft (3 m) or less to connect to the computer. Connecting devices with remote control connectors When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly. Next, configure the "Connection" and "Setting". Connection Use the supplied remote connector cable to connect the REMOTE CONTROL IN connector of this unit to REMOTE CONTROL OUT connector of the amplifier. Setting Turn the EXTERNAL/INTERNAL switch on the unit to "EXTERNAL". 0 This setting will disable remote sensor reception of this unit. 0 To operate the unit, point the remote control at the remote sensor of the amplifier. 0 To use this unit by itself without connecting an amplifier, turn the switch to "INTERNAL". This unit ENGLISH Connecting the timer device This unit can perform timer play when an amplifier and timer device are connected to this unit. ("Timer Play" (v p. 27)) This unit Amplifier To household power outlet (AC 120V, 60Hz) Timer device . Connecting the power cord After completing all the connections, insert the power plug into the power outlet. Playback Settings Tips Appendix Remote connector cable (supplied) Amplifier Signal flow Set to "EXTERNAL". To household power outlet (AC 120 V, 60 Hz) . Power cord (supplied) . 10