Marantz SA-10 All-new SACD-M3 transport mechanism for CD SACD and mor - Page 32
Desired sound does not come out
View all Marantz SA-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
ENGLISH n Display on this unit shows nothing Symptom Cause / Solution Display is off. 0 Press the DISPLAY button, and change the setting to "On". n No sound comes out Symptom No sound is produced. Or sound is distorted. Cause / Solution 0 Check the connections for all devices. 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check the amplifier's functions and controls and adjust as necessary. 0 When connecting to a device with digital audio input connectors, set "Digital Out" to "On". 0 Digital audio output stops when playing the HD layer of a Super Audio CD or a file with a DSD signal or a linear PCM signal with a sampling frequency of 352.8 kHz or higher. 0 If using headphones, check that "Phones" is set to "On" in the menu. Sound is not output through the headphones jack if "Off" is set. n Sound is interrupted or noise occurs Symptom Cause / Solution During playback from the CD-R/CD-RW/ 0 The sound may skip during playback of a CD-R/CD-RW containing a high-resolution audio source. DVD-R/DVD-RW/DVD+R/DVD+RW, sound is occasionally interrupted. 0 This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use a correctly recorded disc. During playback from the USB memory device, sound is occasionally interrupted. 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. Sound is interrupted during playback of 0 Do not start applications other than the player software while playing music on your computer. tracks saved on a computer. 0 The sound may be interrupted depending on the hardware or software configuration of the computer being used. n Desired sound does not come out Symptom Cause / Solution Headphone volume is low. 0 Switch "HP AMP Gain" to "Middle" or "High" if using headphones with high impedance or low sensitivity. n The phase of the audio is inverted Symptom Cause / Solution The phase of the audio is inverted. 0 Check the phase of the connected device and adjust the phase. Set "Phase" in the menu to set the balanced output phase. It is recommended to keep the original setting ("Normal") when using an unbalanced connection. Page 11 Page 8 12 - 26 Page - - - - - Page 26 Page 27 31