Marantz SA-10 All-new SACD-M3 transport mechanism for CD SACD and mor - Page 28

ENGLISH Resume Play When the playback media mode is switched, the USB memory device is disconnected and then connected, or the power is turned off and then back on during USB memory device playback, the unit memorizes the point where playback stopped (resume information) so that playback can resume from after that point. On (Default): Off: Resume playback is set. Resume playback is not set. NOTE 0 Resume playback works even if the USB memory device is disconnected and then reconnected. However, if a different USB memory device is connected, the resume information for the previous USB memory device is deleted. 0 The resume information may be deleted when the USB memory device is removed and files are added or deleted. 0 Press 2 while playback is stopped to delete the resume information. "Resume Off" is displayed. 0 Resume information is not recorded when the power is turned off by pressing X during USB memory device playback. Phase Switches the output signal phase for balanced outputs. (XLR connectors) (v p. 8) Normal (Default): Inverted: European system USA system 0 The output signal for unbalanced output changes when the "Phase" setting is changed. It is recommended to keep the original setting ("Normal") when using an unbalanced connection. AutoStandby Sets whether to automatically switch the unit to the standby mode when the unit remains in the stop mode for more than 30 minutes. On: Off (Default): Enable Auto Standby mode. Disable Auto Standby mode. 0 When an iPod is being charged, this unit enters the power standby mode after charging is complete. Timer Play This unit can perform timer play by cooperating with your timer device. ("Connecting the timer device" (v p. 10)) On: Off (Default): Timer play is set. Select the playback media mode to be used for timer play. Timer play is not set. n Using the timer play function 1. Turn on the power of the connected components. 2. Load a disc or connect an iPod or USB memory device. 3. Switch the amplifier's function to input from the connected unit. 4. Set the audio timer for the desired times. 5. Turn the timer on. The power of the components connected to the timer turns off. When the set time is reached, the power of the different components automatically turns on and playback starts from the first track. NOTE 0 For connection to audio timer and it's operation, please refer to the instruction manual of your audio timer. 0 The timer play does not support the random playback, repeat playback or program playback. 27