Marantz SA-10 All-new SACD-M3 transport mechanism for CD SACD and mor - Page 15

Overview Connections n Switching the display Press INFO. Displays text and time information stored on media. 0 The text information is only displayed for Super Audio CD. 0 The player can display the following characters : ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789 l space) n Discs that can be played back 0 See "Discs". (v p. 34) n Playing a specific track (Direct searching) 1 Use 0 - 9 and +10 to select the tracks. GExampleH Track 4 : Press number 4 to select track 4. Track 12 : Press numbers 1 and 2 consecutively to select track 12. 0 The number you enter is set about 1.5 seconds after you press the number buttons. To enter a two-digit number, be sure to press the two number buttons, one immediately after the other. Playing tracks in a specific order (Program playback) Up to 20 tracks can be programmed. 1 In the stop mode, press PROGRAM. The "PROG" indicator on the display lights. 2 Use 0 - 9 and +10 to select the tracks. GExampleH Track 4 : Press number 4 to select track 4. Track 12 : Press numbers 1 and 2 consecutively to select track 12. 0 The number you enter is set about 1.5 seconds after you press the number buttons. To enter a two-digit number, be sure to press the two number buttons, one immediately after the other. 3 Press 1. Playback starts in the programmed order. ENGLISH n Checking the order of the programmed tracks In the stop mode, press 9. The tracks are shown in the programmed order in the display each time 9 is pressed. n To clear the last track programmed In the stop mode, press CLEAR. The last track programmed is cleared each time the button is pressed. n Clearing the all programmed track In the stop mode, press PROGRAM. 0 When REPEAT is pressed during program playback, the tracks are played repeatedly in the programmed order. NOTE 0 The program is cleared when the disc tray is opened or the power is turned off. Playback Settings Tips Appendix 14