Marantz SR5001 Marantz AV Receiver IR Remote Code List - Page 49

ENGLISH MULTI ROOM SYSTEM (SR5001 only) The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR5001 is located. To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefly below. For details, refer to the instruction manual supplied with the multi room remote control unit and receiver. When the outputs of the MULTI OUT terminals are wired and connected to amplifiers installed in other rooms or M (MULTI) SPEAKER B terminals are wired and connected to L&R speakers in other room, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed. SR5001 has some feature to MULTI ROOM SYSTEM as source selector, sleep timer, Multi Room Speaker output and remote control. MULTI ROOM PLAYBACK USING THE MULTI ROOM OUT TERMINALS The SR5001 is equipped with audio pre-out terminals for which the volume is adjustable as the MULTI output terminals. A separately sold stereo power amplifier can be connected to enjoy multi room playback. The MULTI OUT system can not be operated with the supplied remote controller. 1. 2. 2. AV SURROUND RECEIVER SR5001 INPUT SELECTOR VOLUME MULTI STANDBY POWER ON/STANDBY MULTI SPEAKER PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE DOWN UP MUTE ATT DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R 1. Press the MULTI button. The unit enters multi room mode and the display indicates "SELCT SOURCE" and flashes the "MULTI" indicator for approx. 10 seconds. 2. In this time, you can select the input source by turning the input selector knob. Then, the display indicates "MULTI VOLUME" "MULTI VOL. xx" for approx. 5 seconds. 3. During this time, you can set the volume level in the multi room as desired. This will only set the volume in the second room. MULTI ROOM PLAYBACK USING THE MULTI SPEAKER TERMINALS The SR5001 allows you to connect another set of speakers and place them in a different room or separated area for listening to music. The MULTI ROOM SPEAKER system can not be operated with the supplied remote controller. 2. 1. 2. AV SURROUND RECEIVER SR5001 INPUT SELECTOR VOLUME MULTI STANDBY POWER ON/STANDBY MULTI SPEAKER PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE DOWN UP MUTE ATT DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R 1. Press the MULTI SPEAKER button. The unit enters multi room speaker mode and the display indicates "SELCT SOURCE" and flashes the "MULTI" indicators for approx. 10 seconds. 2. In this time, you can select the input source by turning the input selector knob. 3. Then, the display indicates "MSPKR VOLUME" "MSPKR VOL.-18" for approx. 5 seconds. During this time, you can set the volume level in the multi room as desired. This will only set the volume in the multi room. Notes for MULTI ROOM SPEAKER • MULTI ROOM SPEAKER On/ Off is available in main room only. • MULTI ROOM SPEAKER output terminals can be used when the SURROUND BACK SPEAKER is set NONE in SPEAKER SETUP menu. (See SPEAKER SETUP, page 26) • "The Surr. Back Speakers are in use" is displayed by pressing the MULTI SPEAKER button when the SURROUND BACK SPEAKER is set except NONE in SPEAKER SETUP menu. (See SPEAKER SETUP, page 26) • Multi room operations cannot be performed from the remote controller. 46