Marantz SR5001 Marantz AV Receiver IR Remote Code List - Page 52

GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore: - disconnect the plug from the AC line supply - after waiting at least three minutes, reconnect the plug to the AC line supply - re-attempt to operate the equipment Memory backup • In case a power outage occurs or the power cord is accidentally unplugged, the SR4001/ SR5001 is equipped with a backup function to prevent memory data such as the preset memory from being erased. HOW TO RESET THE UNIT AV SURROUND RECEIVER SR5001 INPUT SELECTOR VOLUME MULTI STANDBY POWER ON/STANDBY MULTI SPEAKER PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE DOWN UP MUTE ATT DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R Should the operation or display seem to be abnormal, reset the unit with the following procedure. To turn on the SR4001, press and hold the 7.1CH INPUT and ATT buttons simultaneously for 3 seconds or more. To turn on the SR5001, press and hold the MULTI and ATT buttons simultaneously for 3 seconds or more. Remember that the procedure will reset the settings of the SOURCE, Surround mode, delay time, TUNER PRESET etc., to their initial settings. TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range 87.5 - 108.0 MHz Usable Sensitivity IHF 1.8 µV/16.4 dBf Signal to Noise Ratio Mono/Stereo 75/70 dB Distortion Mono/Stereo 0.2/0.3 % Stereo Separation 1 kHz 45 dB Alternate Channel Selectivity 300 kHz 60 dB Image Rejection 98 MHz 70 dB Tuner Output Level 1 kHz, ± 75 kHz Dev 800 mV AM TUNER SECTION Frequency Range 520 - 1710 kHz Signal to Noise Ratio 50 dB Usable Sensitivity Loop 400mV/m Distortion 400Hz, 30 % Mod. 0.5 % Selectivity 20 kHz 70 dB AUDIO SECTION (SR4001) Power Output (20 Hz - 20 kHz/THD=0.08%) Front L&R 8 ohms 80 W / Ch Center 8 ohms 80 W / Ch Surround L&R 8 ohms 80 W / Ch Surround Back L&R 8 ohms 80 W / Ch Front L&R 6 ohms 105 W / Ch Center 6 ohms 105 W / Ch Surround L&R 6 ohms 105 W / Ch Surround Back L&R 6 ohms 105 W / Ch Input Sensitivity/Impedance 168 mV/ 47 Kohms Signal to Noise Ratio(Analog Input / Pure Direct) .... 105 dB Frequency Response (Analog Input / Pure Direct) 8 Hz - 100 kHz (± 3 dB) (Digital Input / 96 kHz PCM) 8 Hz - 45 kHz (± 3 dB) AUDIO SECTION (SR5001) Power Output (20 Hz - 20 kHz/THD=0.08%) Front L&R 8 ohms 90 W / Ch Center 8 ohms 90 W / Ch Surround L&R 8 ohms 90 W / Ch Surround Back L&R 8 ohms 90 W / Ch Front L&R 6 ohms 110 W / Ch Center 6 ohms 110 W / Ch Surround L&R 6 ohms 110 W / Ch Surround Back L&R 6 ohms 110 W / Ch Input Sensitivity/Impedance 168 mV/ 47 Kohms Signal to Noise Ratio(Analog Input / Pure Direct) .... 105 dB Frequency Response (Analog Input / Pure Direct) 8 Hz - 100 kHz (± 3 dB) (Digital Input / 96 kHz PCM) 8 Hz - 45 kHz (± 3 dB) VIDEO Television Format NTSC Input Level/Impedance 1 Vp-p/75 ohms Output Level/Impedance 1 Vp-p/75 ohms Video Frequency Response .......5 Hz to 8 MHz (- 1 dB) Video Frequency (Component) ....5 Hz to 80 MHz (- 1 dB) S/N 60 dB GENERAL (SR4001) Power Requirement AC 120 V 60Hz Power Consumption 450 W Weight 25.1 lbs (11.4 Kg) DIMENSIONS 17-5/16 ins. (440 mm) AV SURROUND RECEIVER SR5001 INPUT SELECTOR VOLUME MULTI STANDBY POWER ON/OFF MULTI SPEAKER PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE DOWN UP MUTE ATT DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R 9/16 ins. (14 mm) 5-3/4 ins. (146 mm) 6-5/16 ins. (160 mm) 13/16 ins. (20 mm) 13-7/16 ins. (341 mm) 15-1/8 ins. (384 mm) 29/32 ins. (23 mm) GENERAL (SR5001) Power Requirement AC 120 V 60Hz Power Consumption 500 W Weight 27.1 lbs (12.3 Kg) ACCESSORIES Remote Control Unit RC5001SR 1 AAA-size batteries 2 FM Antenna 1 AM Loop Antenna 1 Front AUX Jack Cover 1 AC Power Cord 1 Warranty Card (USA × 1, Canada × 1) Specifications subject to change without prior notice. 49 ENGLISH