Marantz VP-12S4 User Manual - Page 26

ENGLISH Fine Menu 1 By adjusting this Fine Menu, you can make fine picture adjustment. Standard 1 Picture Adjust Fine Menu 1 Fine Menu 2 Input Signal RGB/HD Adjust Display OSD/Blanking Config. Sharpness 0 Noise Reduction 0 R Gain 0 G Gain 0 B Gain 0 R Bias 0 G Bias 0 B Bias 0 Item Sharpness Noise Reduction R Gain G Gain B Gain R Bias G Bias B Bias Adjustments -25 Ô 0 Ô 25 0 50 -50 Ô 0 Ô 50 -50 Ô 0 Ô 50 -50 Ô 0 Ô 50 -50 Ô 0 Ô 50 -50 Ô 0 Ô 50 -50 Ô 0 Ô 50 - Sharpness Adjust the sharpness. - Noise Reduction Adjust the noise reduction. - R Gain This menu allows the users to set the gain for red. - G Gain This menu allows the users to set the gain for green. - B Gain This menu allows the users to set the gain for blue. - R Bias This menu allows the users to set the bias for red. - G Bias This menu allows the users to set the bias for green. - B Bias This menu allows the users to set the bias for blue. Note : • The settings made in Fine Menu 1 are saved in the currently selected Picture Mode index (Default excluded). 20 Fine Menu 2 Standard 1 Picture Adjust Fine Menu 1 Fine Menu 2 Input Signal RGB/HD Adjust Display OSD/Blanking Config. Cinema VCR Mode Black Level FRC Picture Shift V Luminance Gain Chroma Delay Auto On 0 IRE Auto 0 0 0 Item Cinema VCR Mode Black level FRC Picture Shift V Luminance Gain Chroma Delay Adjustments Auto, Off On, Off 0 IRE, 7.5 IRE /Normal, Expand (For HDMI input) Auto, On -50 Ô 0 Ô 50 -50 Ô 0 Ô 50 -5 Ô 0 Ô 5 - Cinema Auto : Automatically selects the cinema mode when a video signal is input. NTSC: 3-2 pull down, PAL: 2-2 pull down Off : Pull-down processing is not performed. - VCR Mode On : A projector is forced into the intra-field only deinterlacing mode. Off : A projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion adaptive video deinterlacing and full frame film source deinterlacing using 3:2 pulldown detection (2:2 pulldown for 625/50 sources). - Black level Select the black level by a video source. - FRC (Frame Rate Conversion) Auto : Frame Rate Conversion function is basically off. However FRC turns on automatically depending on vertical frequency of input signal. On : Frame Rate Conversion function is "On". (60Hz fixed) - Picture Shift V When Aspect on the Picture Adjust menu is set to "Zoom", this setting allows the user to move the projected image vertically in order to see parts on the image not appearing on the screen. - Luminance Gain This menu allows the users to set the luminance gain. - Chroma Delay This menu allows the users to set the chrominance delay. Notes : • There are some parameters can not adjust according to input signal. • The settings made in Fine Menu 2 are saved in each currently selected input signal source.