Maytag MAH9700AWW Use and Care Guide - Page 8

USING THE CONTROLS Control features vary by model. SELECT CYCLE OPTIONS, CONT. Press the appropriate pad(s) to select one or more options.The indicator light above the pad will illuminate when the option is selected. Prewash (select models) - Can be selected with any cycle. Add detergent to the prewash section of the detergent compartment.Washer fills with cold water and detergent, tumbles for 25 minutes, then drains and advances to the selected cycle. Stain Treat (select models) - Adds 5 minutes to the wash for better stain removal. Extra Rinse - Adds an additional rinse at the end of the cycle to more thoroughly remove laundry additives and perfumes. Extended Spin (select models) - Adds additional time to the spin to remove more water from the load. Rinse and Spin - Use for loads that need rinsing only or to add rinse-added fabric softener to a load. Spin Only - Provides a spin to remove more water from the load. Step 6 START THE WASHER To start the washer, press the Cycle Selector dial. Before the washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain. Changing a Cycle If an incorrect cycle has been accidentally selected: 1. Press the Cycle Selector dial. 2.Turn the Cycle Selector dial to the desired cycle. 3. Set the desired options for the cycle. 4. Press the Cycle Selector dial.The Wash indicator lights stop flashing and the new cycle starts. Canceling a Cycle To cancel a cycle: 1. Press the Power Off pad. 2. Select the Rinse and Spin or Spin Only option pad. 3. Press the Cycle Selector dial.The Spin light illuminates and the washer starts the rinse or spin. 7