Maytag MER5775RAB Use and Care Guide - Page 10
Codes
View all Maytag MER5775RAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5 To cancel the CJock dispJay: If you do not want the time of day to dispHay: Press and hoM the CANCEL and Clock pads for three seconds. The time of day wifl disappear from the dispHay When the chock dispHayis cancelled, press the Clock pad to briefly dispHaythe time of day. To restore the Clock display: Press and hoHdthe CANCEL and Clock pads for three seconds. The time of day will reappear in the dispHay. The timer can be set from one minute (0:011)up to 99 hours and 59 minutes (99:59D. The timer can be used independently of any other oven activity'. It can also be set while another oven function is operating. The timer does not control the oven. It only controls a beeper. Locking the Control and Oven Door The touchpad controls and oven door carl be locked for safety, cleaning, or to prevent unwanted use. They will not function when locked. If the oven is currently in use, the controls and door cannot be locked. The current time of day will remain in the display when the controls are locked. TProeslsocakn:d hold the CANCEL and Cook & Hold pads for three seconds. (Press CANCEL pad first.i) -- @ LOCK flashes in the display. To unlock: Press and hold the CANCEL and Cook & Hold pads for three seconds. (Press CANCEL pad first.i) LOCK disappears from the display. To set the Timer: 1. Press the Timer pad. Timer Fault Codes ° 0:00 lights in the display BAKE or LOCK may flash rapidly in the display to alert you if , The colon wi[[ flash. there is an error or a problem. If BAKE or LOCK flash in the display, press CANCEL pad. If BAKE or LOCK continue to 2. Press the More+ or Less- pad until the flash, disconnect power to the appliance. Wait a few minutes, correct time appears in the display. , The colon will continue to flash. Less- and then reconnect power= If the flashing still continues, d. isconnect power to the appliance and call an authorized servicer. 3. Press Timer pad again or wait four seconds. ° The colon continues flashing and the time begins counting down. ° The last minute of the timer countdown will be displayed as seconds, 4. At the end of the set time, one long beep will sound. To cancel the Timer: 1. Press and hold the Timer pad for three seconds. OR 2. Press the Timer pad and set the time to 0:00. 9