Maytag MER5775RAB Use and Care Guide - Page 19
Se f-Cmean
View all Maytag MER5775RAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Se f-Cmean Oven To set Self-Clean: o It is normal for parts of the range to become hot during a self-clean cycle, - To prevent damage to oven door. do not attempt to open the door when LOCK is displayed, , Avoid touching cooktop, door. window or oven vent area during a clean cycle, • Do not use commercial oven cleaners on the oven finish or around any part of the oven, They wifi damage the finish or parts. The self-clean cycle uses above-normal cooking temperatures to automatically clean the oven interior. It is normal for flare-ups, smoking, or flaming to occur during cleaning if the oven is heavily soiled. It is better to clean the oven regularly rather than to wait until there is a heavy buildup of soil in the oven. During the cleaning process, the kitchen should be well ventilated to get rid of normal odors associated with cleaning. Before Se f-Cmeaning 1. Turn off the oven light before cleaning. The light may burn 2. Remove all pans and oven racks from the oven. The oven racks will discolor and may not slide easily after a selfclean cycle if they are not removed. 3. Clean oven frame, door frame, area outside of gasket, and around the opening in the door gasket with a nonabrasive cleaner such as Bon Ami* or detergent and water. The self-cleaning process does not clean these areas. They should be cleaned to prevent soil from baking on during the clean cycle. (The gasket is the seal around the oven door and -=_ /_ 4. To prevent damage, do not clean or rub the gasket around the oven wdoinodr.owT.h} e gasket is designed to _", - seal in heat during the clean cycle. 5. Wipe up excess grease or spillovers from the oven bottom. This prevents excessive smoking, flare-ups or flaming during the clean cycle. 6. Wipe up sugary and acidic spillovers such as sweet potatoes, tomato, or milk-based sauces. Porcelain enamel is acid-resistant, not acid-proof. The porcelain finish may discolor if acidic spills are not wiped up before a self-clean cycle. 1 Na octle:anOcvyecnlet.emperature must be below a00° F to program 1 1. Close the oven door. 2. Press the Clean {Limpieza} pad. ° CLEAN flashes in the display. 3. Press the Mere+ (M_s} or Less- (Menos} pad. .A...4..o. re+) ° MEd {Medium soil, 3 hours} is displayed. If the door is not closed, beeps wiii sound and "door" will display. If the door is not closed within 45 seconds, the self-cleaning operation wiii be canceled and the display wiii return to the time of day. Less 4. Press the More+ or Less- pad to scroll through the selfcleaning settings. HVy {Heavy Soil, 4 hours} MEd {Medium soil, 3 hours} LITE ( Light Soil, 2 hours} Choosing the soil level of the oven automatically programs the self-cleaning time. 5. After four seconds, the oven wiii start cleaning. ° The cleaning time wiii start counting down in the display. ° LOCK wiii appear in the display. , CLEAN wiii appear in the display. To DeJay a SeRf-Clean Cycle: 1. Press the Clean and Timer pads. , DELAY and 00:00 will appear in the display. 2. Press the Mere+ or Less- pad to set the amount of time you want to delay the cycle. Delay time can be set from ten minutes (00:10} to 11 hours, 59 minutes (11:59}. 3. Press the Clean pad. , CLEAN will flash. 4. Press the Mere+ or Less- pad. , MEd (Medium soil, 3 hours} is displayed. eonto * Brand names for cleaning products are registered trademarks of the respective manufacturers. 18