Maytag MER5775RAB Use and Care Guide - Page 15
Automatic, Shut-Off, Sabbath, Changing, °F/°C
View all Maytag MER5775RAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Q Automatic Shut-Off/ Sabbath Mode The oven will automatically turn off after 12 hours if you accidentally Heaveit on= This safety feature can be turned off= TO cancel the 12-hour shut-off and run the oven continuously for 72 hours: 1. Set the oven to bake [see page 10]= 2= Press and hoHdthe Clock pad for five seconds. ° SAb will be dispHayedand flash for five seconds. , SAb will then be dispHayedcontinuousHy until turned off or until the 72-hour time limit is reached. ° BAKE will also be displayed if a bake cycle is in use while the oven is in Sabbath Mode. , BAKEis the only function that operates during the Sabbath Mode. Aft other functions (Time,,,Keep Warm, Clean, etc.) are locked out during the Sabbath Mode. To cance! Bake when in Sabbath Mode: Press CANCEL= , BAKE will turn off in the display. , No beeps will sound. TO cancel the Sabbath Mode: 1. Press the Clock pad for five seconds. OR 2. After 72 hours, the Sabbath Mode will end. , SAb will flash for five seconds. , The time of day will return to the display. Sabbath Mode Notes: , Sabbath Mode can be turned on at any time with or without the oven on. , Sabbath Mode cannot be turned on if the touchpads are locked out or when the door is locked. If the oven is baking when Sabbath Mode is set, BAKE will go out at the end of the baking cycle. There will be no audible beeps. If the oven light is desired while in Sabbath Mode, it must be turned on before the Sabbath Mode is started. When the Sabbath Mode is started, no preheat beep wiii sound. All prompts, messages and beeps are deactivated when Sabbath Mode is active. The automatic door lock does not operate during the Sabbath Mode. Pressing CANCEL will cancel a bake cycle, however the control will stay in the Sabbath Mode. If power fails, the oven will power up in Sabbath Mode with 72 hours remaining and no cycle active. Changing Temp °F/°C 1= The factor}, default setting for temperature is FahrenheiL 2. To change the setting, press and hold the CANCEL and Bake pads at the same time for three seconds. 3. A single beep will sound and the current setting will be displayed (°F or °C)=(if no change is made, the range will return to the existing setting after 30 seconds.[) 4. To change the setting, press the More+ or Less- pad. Press again to return to existing setting. Wait five seconds and the setting will be complete. 14