Maytag MGT8775XS Installation Instructions - Page 12

GAS CONVERSIONS Gas conversions from Natural gas to LP gas or from LP gas to Natural gas must be done by a qualified installer. To Convert Gas Pressure Regulator WARNING 1. Locate gas pressure regulator at the rear of the range. Explosion Hazard Use a new CSA International approved gas supply line. Install a shut-off valve. Securely tighten all gas connections. If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column. Examples of a qualified person include: licensed heating personnel, authorized gas company personnel, and authorized service personnel. Failure to do so can result in death, explosion, or fire. LP Gas Conversion WARNING Tip Over Hazard A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. Failure to follow these instructions can result in death or serious burns to children and adults. 1. Turn manual shutoff valve to the closed position. B A C A. To range B. Shutoff valve (closed position) C. Gas supply line 2. Unplug range or disconnect power. A A. Gas pressure regulator IMPORTANT: Do not remove the gas pressure regulator. 2. Unscrew the regulator cap and remove the plastic cover. A B A. Plastic cover B. Regulator cap 3. Flip the regulator cap over and replace the plastic cover. B A C A. Natural gas position B. LP gas position C. Plastic cover 4. Screw the regulator cap securely back into place. Do not overtighten. 12