Maytag MGT8775XS Installation Instructions - Page 16
To Convert Gas Pressure Regulator, To Convert Oven Bake Burners
UPC - 883049199559
View all Maytag MGT8775XS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
To Convert Gas Pressure Regulator 1. Locate gas pressure regulator at the rear of the range. A To Convert Oven Bake Burners To Convert Lower Oven Bake Burner: 1. Remove oven racks from inside the oven cavity. 2. Remove oven door. See "Oven Door" section in the Use and Care Guide for oven door removal instructions. 3. Push the bake burner cover to the right. A. Gas pressure regulator IMPORTANT: Do not remove the gas pressure regulator. 2. Unscrew the regulator cap and remove the plastic cover. A B A A. Bake burner cover 4. Lift up and remove oven bake burner cover. 5. Unscrew wing nut and remove oven baffle. A. Plastic cover B. Regulator cap 3. Flip the regulator cap over and replace the plastic cover. A B C B A A. LP gas position B. Natural gas position C. Plastic cover 4. Screw the regulator cap securely back into place. Do not overtighten. A. Oven baffle B. Wing nut 6. Remove the oven bake burner screw and set aside. 7. Gently set the bake burner to the side. A B A. Igniter and wires B. Bake burner screw 16