Meade ETX125 Instruction Manual - Page 36
Advanced Alt/Az Alignment
View all Meade ETX125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Fig. 29a [top view]: Rotate the telescope tube counterclockwise until it stops..... Fig. 29b [top view]: ....then rotate it clockwise a quarter turn..... 36 Fig. 29c [side view]: ....until a fork arm is over the computer control panel. displays information about an object in its database that is closest to the one you queried about. Important Note: For this function to operate properly, you must first set the telescope in the home position and initialize AutoStar. If you physically move the telescope after initialization, this function will fail to operate properly. In this procedure, you will center an object you wish to have identified by AutoStar in the telescope eyepiece and use the "Identify" menu to find out information about the object or the nearest object to it in the AutoStar database. 1. Center the object you wish to have identified in the telescope's eyepiece. 2. Navigate to the "Object: Identify" option and press ENTER. 3. "Searching..." displays. When AutoStar finishes calculating, the name of the closest object displays. 4. Press a Scroll key to display information about this object. AutoStar displays some or all the following information about the object with each press of a Scroll key: Displayed information: Catalog or common name of object Type of object Right Ascension Declination Constellation Magnitude Size Scrolling message Example: Messier 107, NGC6171 orion Nebula, etc Globular Cluster, Nebula, Black Hole, etc. 16:32:4 13°03' Virgo orion, etc. 3 2' "This Globular Cluster is 10,000 light years away...." Advanced Alt/Az Alignment If you would rather choose your own alignment stars from the AutoStar database during the Alt/Az alignment procedure, AutoStar offers additional alignment methods. Information for Equatorial (Polar) alignment is discussed in APPENDIX A, page 50. In order to perform either Two-Star, Easy Align or One-Star Alt/az alignment, you will first need to put the telescope in Alt/Az home position: • If necessary, tighten the telescope's vertical lock (6, Fig. 1b). • Unlock the horizontal lock (9, Fig. 1a). This will allow you to rotate the telescope tube and fork arm assembly. • Grasp the telescope by a fork arm and rotate the telescope counterclockwise until it stops (Fig. 29a). • Turn the telescope clockwise about a quarter of a turn (Fig. 29b). until a fork arm is directly over the computer control panel (Fig. 29c). • Re-lock the horizontal (9, Fig. 1a) and vertical locks (6, Fig. 1b). Two-Star Alt/Az Alignment and Easy Align Two-Star Alignment requires some knowledge of the night sky. AutoStar provides a database of bright stars and two stars from this database are chosen by the observer for alignment (Easy Align operates the same as Two-Star Alignment, except that AutoStar picks the two alignment stars from its database). 1. Perform steps 1 and 2 as described in AUTOMATIC ALIGNMENT, page 17. 2. With "Align: Easy" displayed, use the Scroll keys to display "Align: Two Star." Press ENTER. (If you wish to use Easy Align, press ENTER when "Align: Easy" displays.) 3. Place the telescope in the home position as described in the AUTOMATIC ALIGNMENT procedure. When you have finished, press ENTER. 4. "Select Star" displays. AutoStar then displays a database of stars for the observer to choose from. Use the Scroll keys to scroll to a star on the list that you wish to align upon. Select a star that you can easily locate in the night sky. Press ENTER. 5. The telescope slews to the star. Use the Arrow keys to move the telescope until the star is centered in the eyepiece. Press ENTER. 6. Repeat procedure for the second alignment star. The telescope is aligned and you are now ready to use AutoStar's GO TO capabilities for a night of observing.