Memorex MLT3221 Manual - Page 21

ENGLISH Chapter 2 Installing the LCD TV   Press the INPUT button on the remote to display the Input Source List. Use the ▲▼ buttons to select TV and press the OK button. Input Source  TV(CABLE/AIR) VIDEO1 (SIDE) VIDEO2 (REAR) VIDEO3 (S-VIDEO) VIDEO4 (YPbPr1) VIDEO5 (YPbPr2) VIDEO6 (HDMI 1) VIDEO7 (HDMI 2) COMPUTER(VGA) Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the TV. Channel Scan Tuner Mode Channel Skip Favorite List Time Zone Cable Eastern Time TV Select Exit  Press the ▼ button to select Channel Scan, and press the OK button. The Channel Scan automatically creates a list of receivable channels. Press the MENU button at any time to interrupt the memorization process.(the list cannot be created if interrupted) Status: Scanning..... Cable Analog Channels: 25 Digital Channels: 0 47% The Channel Scanning will create a list of receivable channels for the current input (antenna or cable). You will be required to run Channel Scanning for each RF input to create a list of available channels from both inputs.  Press the OK button to display the received channel list. Then press ▲▼ to select a channel and press again the OK button to display the channel detail. Channel List 5-2 RF5-2 9-1 KQED-HD 9-2 KOED-SD 8 CCT 12 13 15 Channel Detail Calfornia's Gold Or, use the ▪ (Input button) with 0-9 buttons to select digital channel( for example 9.1) The digital main channel might include many subchannels (for example 9-1, 92..) that are showing program at the same time. 17