Miele CVA 4066 Operating and Installation manual - Page 44

Insert the brush into the milk hoses, one after the other from below. Push

Get Miele CVA 4066 PDF manuals and user guides View all Miele CVA 4066 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Cleaning and care ^ Remove the cover with the milk pipework. Clean the whole part in the dishwasher without taking it apart. If there are milk residues in the milk pipework you can clean them with the cleaning brush provided. To do this, take the cover and the milk pipework apart as follows: ^ Insert the brush into the milk hoses one after the other from below. Push the brush back and forth to the end until there is no more no milk residue in the hoses. Reassemble the milk pipework as follows: Do not pull the milk hoses off the retainers. This may cause the milk pipework to leak. ^ Push the retainer with the plug onto the cover as shown. Make sure that the retainer is sitting properly on the cover. ^ Press the small recess on the dispenser retainer a and pull the retainer out towards the front b. Take the milk hoses off the guide rail. ^ Grasp the second retainer by the stud c and pull it up and off. Now you can clean the hoses with the brush under running water. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
^
Remove the cover with the milk
pipework. Clean the whole part in the
dishwasher without taking it apart.
If there are milk residues in the milk
pipework you can clean them with the
cleaning brush provided. To do this,
take the cover and the milk pipework
apart as follows:
Do not pull the milk hoses off the
retainers. This may cause the milk
pipework to leak.
^
Press the small recess on the
dispenser retainer
a
and pull the
retainer out towards the front
b
. Take
the milk hoses off the guide rail.
^
Grasp the second retainer by the
stud
c
and pull it up and off.
Now you can clean the hoses with the
brush under running water.
^
Insert the brush into the milk hoses
one after the other from below. Push
the brush back and forth to the end
until there is no more no milk residue
in the hoses.
Reassemble the milk pipework as
follows:
^
Push the retainer with the plug onto
the cover as shown. Make sure that
the retainer is sitting properly on the
cover.
Cleaning and care
44