Miele CVA 4066 Operating and Installation manual - Page 48
Drip tray, Drip tray cover
View all Miele CVA 4066 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Cleaning and care Drip tray The trip tray contains a sensor which causes the display to show when the tray is full and needs to be emptied. Clean the drip tray daily. Remove the drip tray after the final rinse when no more water runs from the lines. Carefully remove the drip tray from the machine; the water may be very hot and could cause scalding. ^ Open the door and pull the drip tray out. The drip tray contains a grid to avoid spilling during transport. ^ Wash the drip tray and grid in the dishwasher or by hand with hot water and liquid dish soap, then dry with a soft cloth. Take care that the metal contacts at the back of the drip tray are clean and dry. If the contacts are soiled or wet the unit cannot detect when the drip tray is full and needs to be emptied. ^ Push the drip tray with grid along the right edge all way in the machine. ^ Close the door. Drip tray cover ^ Remove the drip tray cover and wash it. 48