Miele CVA 4066 Operating and Installation manual - Page 60

Coffee water is in the waste unit., The descaling process was started accidently.

Get Miele CVA 4066 PDF manuals and user guides View all Miele CVA 4066 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Frequently asked questions The machine does not rinse when turned on although the automatic rinse feature is set to "On". When the machine is still at a temperature of about 140°F (60°C). The machine will not rinse when it is too hot. The water (or milk) dispensing stops when programming the serving size. Possible fault Solution - There was not enough water in the - Fill the water tank or milk container tank or milk in the milk container. The before programming the serving dispensed amount will not be saved. size. - If the maximum amount is dispensed, the flow stops automatically. The maximum amount is saved. Water is in the waste unit. Possible fault Solution This is not a fault. This is residual water from the cleaning process. "Coffee water" is in the waste unit. Possible fault Solution - If the grind setting is too coarse, this can result in too much coffee water in the waste unit. - The main dispenser cap is not positioned correctly. - Adjust the grind setting and/or amount of coffee. - Lubricate the cap with the supplied silicone grease. - If the cap is faulty, replace it with the spare part supplied. The descaling process was started accidently. The descaling process cannot be canceled once it is started. The process needs now to be completed. This is a safety feature to ensure the process will be completed. It is important for best results and the longevity of the machine. See "Descaling". The machine makes loud noises during descaling During a descaling cycle, the machine is relatively loud because water is being forced through the lines at high pressure. This is not a fault. 60

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
The machine does not rinse when turned on although the automatic rinse
feature is set to "On".
When the machine is still at a temperature of about 140°F (60°C). The machine
will not rinse when it is too hot.
The water (or milk) dispensing stops when programming the serving size.
Possible fault
Solution
– There was not enough water in the
tank or milk in the milk container. The
dispensed amount will not be saved.
– If the maximum amount is
dispensed, the flow stops
automatically. The maximum amount
is saved.
– Fill the water tank or milk container
before programming the serving
size.
Water is in the waste unit.
Possible fault
Solution
This is not a fault.
This is residual water from the cleaning
process.
"Coffee water" is in the waste unit.
Possible fault
Solution
– If the grind setting is too coarse, this
can result in too much coffee water
in the waste unit.
– The main dispenser cap is not
positioned correctly.
– Adjust the grind setting and/or
amount of coffee.
– Lubricate the cap with the supplied
silicone grease.
– If the cap is faulty, replace it with the
spare part supplied.
The descaling process was started accidently.
The descaling process cannot be canceled once it is started. The process
needs now to be completed. This is a safety feature to ensure the process will be
completed. It is important for best results and the longevity of the machine.
See "Descaling".
The machine makes loud noises during descaling
During a descaling cycle, the machine is relatively loud because water is being
forced through the lines at high pressure. This is not a fault.
Frequently asked questions
60